Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Advice regarding AEG to hpa conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Advice regarding AEG to hpa conversion

    Hi
    Im thinking of doing a project but would it be worth trying to change a v2 GB to hpa if so what sort of parts would be needed ,
    Thanks

  • #2
    Re: Advice regarding AEG to hpa conversion

    depending on which kit you are wanting to use, you will need the drop in kit, regulator, hpa tank + any upgrades you want to do at the same time

    Comment


    • #3
      Re: Advice regarding AEG to hpa conversion

      i have done this very thing - it isnt cheap. i went sown the line of the wolverine inferno spartan edition. the engine was circa £250, £100 for a regulator, the tank and line then came in at about £40 ish. it does shoot very very well, but you need to make sure that it is properly aligned as this can have massive bearings on shot consistency, the gen1 version of the Inferno is also picky about buckings. there is a Wolverine Facebook group that is well worth joining, as loads of the guys there have tried pretty much every combination and the are very willing to help.

      Comment

      About the Author

      Collapse

      Cyclops Find out more about Cyclops
      Working...
      X