King Arms R93 Blaser Tactical LSR1

[crasstoe]

Thanks for the feedback. I couldnt find much on them before i bought mine, hopefully this has helped people decide if this is for them or not.

The new sear is holding up nicely, hopefully King Arms use this in all new Blasers!

The cylinder seems to be holding up, but time will tell!
Sent from my TITAN X310e using Board Express

[James 1989]

Re: King Arms R93 Blaser Tactical LSR1

Very nice gun. I just brought one myself and im very happy with it. I do have to ask though, the bipod adaptor, does anyone know where i can get another one as i let my friend borrow the rifle and when i got it back the adaptor was no longer in the box. Any help would be greatly appreciated

[crasstoe]

Re: King Arms R93 Blaser Tactical LSR1

If you do need any replacement parts send an email with a picture of the broken part, in English, to [email protected], and they will quote the cost to get a replacement part to you.

Email King Arms and they should be able to get one to you.

[James 1989]

Re: King Arms R93 Blaser Tactical LSR1

Thanks. I thought i mite be able to buy an after market one but i guess the original one would be best

[crasstoe]

Re: King Arms R93 Blaser Tactical LSR1

Thinking about it, you may be able to make one at home, using a standard sling screw, chopped short and then screwed into a small nut with a washer... it's a bit ghetto but could be done!

[deadlyspud]

Re: King Arms R93 Blaser Tactical LSR1

This has helped me loads, thank you.
Recently my blaser has refused to load, evertime I cock it, it will not catch and just springs forward straight away and everybody I've emailed looking for repairs have said it sounds like the sear and no body will touch it. But knowing now where to get a new part from has just made my day as I've been a miserable bastard since this happend.
Thanks again.
Also as you've done alot with yours, would you agree that it sounds like its the trigger sear?

[crasstoe]

Re: King Arms R93 Blaser Tactical LSR1

Yes sounds just like the trigger sear. Take the upper receiver and barrel off and look at the trigger mech. You should have a tooth that moves when you pull the trigger, and it sounds like that has sheared. King Arms will get a replacement to you for not a lot of £'s and you will be good to go

Just realised the pic in here is old. Update of mine;

[crasstoe]

Re: King Arms R93 Blaser Tactical LSR1

Good news for all interested in Blasers!

King Arms have released the following;

Reinforced Trigger Set for KA Blaser R93






Cylinder Set for KA Blaser R93 (550fps and 500fps sets)




Cylinder for KA Blaser R93




Full list of available items from King Arms can be found here. just search BLASER; http://www.kingarms.com/searchcode.asp

Again, if you do need any replacement parts send an email with a picture of the broken part, in English, to [email protected], and they will quote the cost to get a replacement part to you.

The cylinders look to be a massive improvement as they are no longer crimped together, rather they are bolted together, and now made of stainless steel. The reinforced trigger is now steel rather than an alloy.

[crasstoe]

Re: King Arms R93 Blaser Tactical LSR1

King Arms Blaser complete v2 cylinder set on the way which includes a bearing spring guide, aluminum piston, v2 rubber piston head, King Arms M180 progressive spring, and of course the aluminium v2 cylinder itself. Also have the v2 Reinforced Trigger Unit on the way and a spare mag.

I shall upload pictures and my review when they arrive.

[dave38x]

Re: King Arms R93 Blaser Tactical LSR1

You are doing a far better job than any salesperson could ever manage of persuading me to buy one of these...

[crasstoe]

Just being honest.

Just been refunded for the trigger set, turns out they don't come out till the end of the monty. Cylinder set is on its way from HK though, got the dispatch email last night.
Sent from my Windows Phone using Board Express Pro

[deadlyspud]

Re: King Arms R93 Blaser Tactical LSR1

Where have you ordered the new trigger unit from (or will be when it's out) ans how much is it if you don't mind me asking?

[crasstoe]

Hi Spud,

I can't say where it is from due to forum rules. I am assured that you will be able to import them by the end of the month, for US $120. That's for the whole unit that just drops in.

Sent from my Windows Phone using Board Express Pro

[deadlyspud]

Re: King Arms R93 Blaser Tactical LSR1

Okay no problem, thank you

[crasstoe]

Re: King Arms R93 Blaser Tactical LSR1

Ok so the new cylinder has arrived. It is much heavier, a stronger build and feels nicer in the hand. I will post my findings when I get a chance to fit and test. As always I will post pictures