Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Ares WA2000 Review

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Ares WA2000 Review

    The cylinder is 100% compatible except for Teflon cylinders.
    The stock inner barrel is slightly different to a VSR one but normal VSR inner barrels can be used, I'm using a laylax 6.03 at the moment.
    once the barrel has been change normal VSR hop rubbers can be used, I'm using the nine-ball one.
    With the sears I'm not 100% sure if they are compatible or not, the spring guide stopper looks to be compatible, and all the sears look similar, but I can be certain, they shouldn't need replacing anyway!
    Traded with me? please leave feedback as will I http://www.zeroin.co.uk/itrader.php?u=104161

    Comment


    • #17
      Re: Ares WA2000 Review

      I took mine apart today, yes it is a bit of a lengthy process but it's very simple.
      The only thing that has annoyed me about it aside from ASG and their fucking re-branding 6mm bb markings is that with the hop off bb's load but fall out of the barrel but who cares, the hop is always on!
      AP.

      Comment


      • #18
        Re: Ares WA2000 Review

        I had the problem when bb's would just role out, check if the little block in the hop, in front of the rubber is seated corectly, mine wasn't and after I corrected it it solved the problem
        Traded with me? please leave feedback as will I http://www.zeroin.co.uk/itrader.php?u=104161

        Comment

        About the Author

        Collapse

        MilataryMupet I'm the "fuc**ng kid with the axe" :P Find out more about MilataryMupet
        Working...
        X