g&g m14 ebr motor cage wont fit

[eatthis]

i bought a new motor cage because 2 tabs broke off mine but the receiver refuses to go back in the stock with the cage fitted why the hell wont it go??

[dadio]

Re: g&g m14 ebr motor cage wont fit

ebr's have a different type of adjuster for motor height ,the standard m14 motor cage is going to foul the stock, some filing or dremmeling might help or order up an ebr motor cage ,good luck i have never seen them on sale on zero one so they may not be out there as spares unless there is another airsoft shop i don't know of.

[eatthis]

Re: g&g m14 ebr motor cage wont fit

i got the cage from zero1 and it looks identical to the 1 that came off.
the thing is i cant see WHERE its catching the stock it goes maybe half way in then hits something hard

[eatthis]

Re: g&g m14 ebr motor cage wont fit

nobody else had this issue?

[eatthis]

Re: g&g m14 ebr motor cage wont fit

iv got the pistol grip off and its not even close to fitting. the bottom screw on the cage sticks through the bottom of the chassis at least 15mm and even with the pistol grip plate removed its still nowhere near to fitting into the chassis

[eatthis]

Re: g&g m14 ebr motor cage wont fit

here are some pics of it

[eatthis]

Re: g&g m14 ebr motor cage wont fit

with the motor attached theres no way it will fit into the chassis the motor just wont sit flat enough.

anybody with 1 of these guns got a pic of the cage?

[meddy]

Re: g&g m14 ebr motor cage wont fit

can i see the hand grip where it attaches to the body . and what it looks like trying to fit it. and anything else you can thing of


(not got this model but will try to help)

[eatthis]

Re: g&g m14 ebr motor cage wont fit

the grip fits to the chassis via a flat plate i took it off to see/show how much the motor sticks out the bottom.
iv put the assembled gearbox next to the chassis and its nowhere near shallow enough to fit.
the motor would stick through the bottom even if i could get it in to start with

[meddy]

Hmmm ok next question
Is the pinion in gearbox engaged? And or firing?

meddy

[eatthis]

Re: g&g m14 ebr motor cage wont fit

yeh the gearboc itself works fine the motor is where it should be inside the box itself

- - - Updated - - -

found this http://www.airsoftsniperforum.com/showthread.php?t=933

it should work but i dont understand why i need to do it