Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Tokyo Marui m870 breacher overview

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tokyo Marui m870 breacher overview

    The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

  • #2
    Re: Tokyo Marui m870 breacher overview

    That engrish on the box! "3 from 6 reshuffling!"

    Makes me want it more and I already have the full length one.

    Comment


    • #3
      Re: Tokyo Marui m870 breacher overview

      LOL did not see that until you pointed it out.
      The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

      Comment


      • #4
        Re: Tokyo Marui m870 breacher overview

        Looks like putting the magazine in the grip can be a bit of a pain!

        Comment


        • #5
          Re: Tokyo Marui m870 breacher overview

          yes can be a tricky I think I was being careful with it.
          The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

          Comment


          • #6
            Re: Tokyo Marui m870 breacher overview

            once its in does it stay there or do you think there's a risk of it falling out in a skirmish?

            Comment


            • #7
              Re: Tokyo Marui m870 breacher overview

              just been playing with it, I think it will be hard to lose, there is a hiss when ejecting and you need a strong push on the recessed button.
              The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

              Comment


              • #8
                Re: Tokyo Marui m870 breacher overview

                Cool. I have dropped my butt plate of my full length one a few times. If it can come off, it will as far as I'm concerned.

                Comment


                • #9
                  Re: Tokyo Marui m870 breacher overview

                  I want to see one of these with an angry gun stock....

                  I so want one, but must sell m4 to pay for it.
                  -'Sly villain! Thou does not acknowledge thine hits!'
                  -'I doth so, yonder vagabond, but thouest has the control of a nunnery whore, and thine accuracy doth compare to thine codpiece, short of the mark!'

                  Comment


                  • #10
                    Re: Tokyo Marui m870 breacher overview

                    Do you reckon they will release the grip as a separate item so you can add it to the full length version when playing close quarters?

                    Comment


                    • #11
                      Re: Tokyo Marui m870 breacher overview

                      the stock is interchangeable between the full tm870 and the breacher.

                      The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

                      Comment


                      • #12
                        Re: Tokyo Marui m870 breacher overview

                        I hope they do release the grip, but Being TM it may be hard to find one..
                        The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

                        Comment


                        • #13
                          Re: Tokyo Marui m870 breacher overview

                          Since the grips are interchangeable, shouldn't aftermarket grips be possible? I'd love a variant like this:

                          http://www.mesatactical.com/wp-conte...2012/08/33.jpg

                          Using breacher mags.
                          Originally posted by Lt. Macka
                          big black shapes draw the eye.

                          Comment


                          • #14
                            Re: Tokyo Marui m870 breacher overview

                            there's a guy from new Zealand who has fitted the angry gun stock.. there's a very good video

                            - - - Updated - - -

                            found it..... luv this guy....brill video.

                            The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

                            Comment


                            • #15
                              Re: Tokyo Marui m870 breacher overview

                              Having just received mine today, I can tell you..it scares me a little

                              it makes massive holes in things, but chronos at around 320
                              -'Sly villain! Thou does not acknowledge thine hits!'
                              -'I doth so, yonder vagabond, but thouest has the control of a nunnery whore, and thine accuracy doth compare to thine codpiece, short of the mark!'

                              Comment

                              About the Author

                              Collapse

                              G33m4N Find out more about G33m4N
                              Working...
                              X