Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Wobbly QD M4 Silencer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wobbly QD M4 Silencer

    So guys my new QD Silencer is wobbly.

    I fitted the issued flash hider and it goes right up tight but you can still move it slightly side to side, and its not as 'fixed' as I want it to me.

    Its noisy and I don't like it.

    Tech wizards among you, please suggest a simple fix.

  • #2
    Re: Wobbly QD M4 Silencer

    Are you going to take it off ever?

    If not, glue it to the flash hider, if you are, tape on the inside of the suppressor might do it
    sigpic

    Comment


    • #3
      Re: Wobbly QD M4 Silencer

      Originally posted by emergencychimp View Post
      Are you going to take it off ever?

      If not, glue it to the flash hider, if you are, tape on the inside of the suppressor might do it
      Tape works. I'd just try electrical or hockey stick tape on the inside of the can if the movement is quite noticeable. Aluminium tape is much thinner than electrical tape and can be built up in specific areas easier than others and is great for making very effective shims on misaligned inner barrels and in this case a suppressor.
      Growing old is mandatory
      Growing up is optional...


      The tinkering tale of an airsoft addict, wargamer and book fanatic at http://ocdairsoft.blogspot.com/
      It even gets updated occasionally... Quite recently even!

      Comment

      About the Author

      Collapse

      wesley92 Find out more about wesley92
      Working...
      X