Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Need new Marushin XM177 barrel fabricated as I don't possess the skill.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need new Marushin XM177 barrel fabricated as I don't possess the skill.

    Hi there Guys. I'm after a bit of help! I have a Replica Marushin XM177, the barrel under the plastic furniture that threads into the front sight post has snapped off. I've tried gluing it several times, but it still won't hold very well.

    Can somebody in this community please help me by making another one?? If you have, or have access to a lathe etc, it would be easily achieved I'd of thought?? The pipe is 14mm. It's 110mm in length. It needs 20mm each end of 14mm CW Thread! Same as most G&P Threads? I have left a picture of it as reference, but please get in touch to discuss payment or details in depth thanks.




    Richie.

  • #2
    Re: Need new Marushin XM177 barrel fabricated as I don't possess the skill.

    is it steel or aluminium?

    - - - Updated - - -

    you also need to know the thread pitch, if you measure from peak to peak it will be 1mm, 1.25mm or 1.5mm use some digital verniers if possible.

    Comment

    About the Author

    Collapse

    richard4wood1970 Find out more about richard4wood1970
    Working...
    X