Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Need new Marushin XM177 barrel fabricated as I don't possess the skill.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need new Marushin XM177 barrel fabricated as I don't possess the skill.

    Hi there Guys. I'm after a bit of help! I have a Replica Marushin XM177, the barrel under the plastic furniture that threads into the front sight post has snapped off. I've tried gluing it several times, but it still won't hold very well.

    Can somebody in this community please help me by making another one?? If you have, or have access to a lathe etc, it would be easily achieved I'd of thought?? The pipe is 14mm. It's 110mm in length. It needs 20mm each end of 14mm CW Thread! Same as most G&P Threads? I have left a picture of it as reference, but please get in touch to discuss payment or details in depth thanks.

    It has a standard 14mm thread that you can screw a CW Flashider on it if that helps? I don't know the pitch of the thread sorry bud standard flashider can go on it! Also it is aluminium made but can be made from metal if that's all available and solid if that's all to hand as well!



    Thanks in advance.

    Richie.

  • #2
    Re: Need new Marushin XM177 barrel fabricated as I don't possess the skill.

    Hi Richie,

    Has anyone come back to you with any leads on this yet?

    Comment


    • #3
      Re: Need new Marushin XM177 barrel fabricated as I don't possess the skill.

      If. Not, try the shooting shed in Lincolnshire. Top machinists.

      Comment

      About the Author

      Collapse

      richard4wood1970 Find out more about richard4wood1970
      Working...
      X