Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

VSR Edgi Sears - Problem.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • VSR Edgi Sears - Problem.

    Hi There!

    Im not really new to airsoft but have never encountered this problem before.

    I have a JG bar10 / VSR which has had Edgi sears, piston , spring guide / stopper and spring installed.
    The trigger shell is a TM one.

    When cocking the rifle the pull is smooth, up until you reach 90% of the way back, where the sears take a great deal of effort to lock back .

    Once you have locked the sear in place you can push the cylinder forward smoothly until it has fully cycled.

    Next, you pull the trigger.. and nothing happens . The trigger does pull and is free to move as it should , however the sears do not seem to release the piston.

    - Has anyone had this issue with a VSR, and how was it resolved ?

    It seems to me as if there is too much friction between the trigger parts to allow release. To temporarily solve the problem I have placed an O ring around the Guide stopper - which seems to allow the bolt to be cycled and shot successfully 70% - 80% of the time .


    Any help would be grand!

    Thank you

About the Author

Collapse

ddb2882 Find out more about ddb2882
Working...
X