BTC Spectre Next Gen version problem

[mightyjebus]

Hi,

I've fitted a new BTC Spectre V2 for a Next Gen recoil and I'm having a slight issue that hopefully someone might have seen before.

This isn't the first time I've fitted one of these but I've not seen this problem before.

When you go to programming mode you can select all the options but the rifle will only fire safe-semi-semi

I've tried various combinations but it always stays safe-semi-semi.

I've tried a factory reset which seems to work as the active breaking goes off. I can program active breaking on without problem and all the other options seems to work apart from the fire selector settings.

For info I'm doing this to select the settings:

Set the selector to semi or auto and connect the battery. The BTC beeps 4 times.
press the trigger 4 times and wait for the 2 beeps - press the trigger once and wait for the 4 beeps (this should set semi position to semi)
press the trigger 7 times and wait for the 2 beeps - press the trigger 4 times and wait for the 4 beeps (this should select 3 round burst on the auto position)
disconnect the battery

Any ideas?

[ElZer0]

Re: BTC Spectre Next Gen version problem

Contact black talon, there v good at responding