Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Air nozzle length for SR25

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Air nozzle length for SR25

    Hello there,

    I am having issues with my SR25 and i believe this may be due to the air nozzle as it seems like the air is leaking through hop. Does any one know what should be the correct air nozzle length for v2.5 GB ?

    Parts:
    Retro Arms SR25 GB
    Retro Arms Hop Up v2 (mk2)
    SHS cylinder head
    SHS piston head
    PoisonApple (apparently rebranded SHS) 24.0mm

    Thanks

  • #2
    Re: Air nozzle length for SR25

    Try an AUG nozzle @ 24.75mm aprox

    the SHS AR10 is 24.1mm so seen many use the AUG nozzles
    sand/file the front of tappet plate to assist in nozzle sealing that little bit better

    Comment

    About the Author

    Collapse

    Infa not bother to write about it.... ! Find out more about Infa
    Working...
    X