Results 1 to 7 of 7

Thread: Suggestions for upgrades on VFC 416

  1. #1
    Join Date
    Aug 2013
    Posts
    223

    Default Suggestions for upgrades on VFC 416



    Finished doing the externals on my VFC 416.

    Thinking about doing some upgrades to the internals. Thinking about
    13:1 gears
    Hi torque motor
    Lightweight piston
    Super pimped mosfet (need suggestions)
    Also any other suggestions for trigger response and ROF suggested

  2. #2
    Join Date
    Apr 2014
    Location
    Ashford, Kent
    Posts
    500

    Default Re: Suggestions for upgrades on VFC 416

    BTC spectra would be my fist choice for trigger response and as your mosfet.

  3. #3
    Join Date
    Aug 2013
    Posts
    223

    Default Re: Suggestions for upgrades on VFC 416

    Was tossing up between the btc and an ascu

  4. #4
    Join Date
    Apr 2014
    Location
    Ashford, Kent
    Posts
    500

    Default Re: Suggestions for upgrades on VFC 416

    Dont compromise. BTC is arguably the best there is. ASCU dont seem to live as long and and a high failure rate. I have owned both types, but now I own two recoils and two normal v2 gearbox aeg, all fitted with spectras, never looked back.

  5. #5
    Join Date
    May 2008
    Location
    north west london
    Posts
    5,594

    Default Re: Suggestions for upgrades on VFC 416

    If you can't get a spectre, get a Gate titan
    VICTORIA CONCORDIA CRESCIT


    LOOKING FOR: S&W N-frame holster
    trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

  6. #6
    Join Date
    Aug 2013
    Posts
    223

    Default Re: Suggestions for upgrades on VFC 416

    Gonna get a trusight tru hop rubber. A drop in flat hop unit

  7. #7
    Join Date
    Jan 2011
    Location
    South East
    Posts
    246

    Default Re: Suggestions for upgrades on VFC 416

    Love the effect on the upper and handgaurd! Looks smart

    I highly recommend the ZCI hi torque motor and a Lonex Hop Unit.

    If you still want crisp semi auto without loads of active braking required maybe aim for 16:1 and a cut off lever chip.

    - - - Updated - - -

    Any nice POM piston, don't go full metal teeth, you want a cheap failsafe point and the piston is the best part for that.

    An 11.1v Lipo will be at home in there with associated upgrade 16awg wiring and deans / XT60

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •