Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Suggestions for upgrades on VFC 416

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Suggestions for upgrades on VFC 416



    Finished doing the externals on my VFC 416.

    Thinking about doing some upgrades to the internals. Thinking about
    13:1 gears
    Hi torque motor
    Lightweight piston
    Super pimped mosfet (need suggestions)
    Also any other suggestions for trigger response and ROF suggested

  • #2
    Re: Suggestions for upgrades on VFC 416

    BTC spectra would be my fist choice for trigger response and as your mosfet.

    Comment


    • #3
      Re: Suggestions for upgrades on VFC 416

      Was tossing up between the btc and an ascu

      Comment


      • #4
        Re: Suggestions for upgrades on VFC 416

        Dont compromise. BTC is arguably the best there is. ASCU dont seem to live as long and and a high failure rate. I have owned both types, but now I own two recoils and two normal v2 gearbox aeg, all fitted with spectras, never looked back.

        Comment


        • #5
          Re: Suggestions for upgrades on VFC 416

          If you can't get a spectre, get a Gate titan
          VICTORIA CONCORDIA CRESCIT


          LOOKING FOR: S&W N-frame holster
          trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

          Comment


          • #6
            Re: Suggestions for upgrades on VFC 416

            Gonna get a trusight tru hop rubber. A drop in flat hop unit

            Comment


            • #7
              Re: Suggestions for upgrades on VFC 416

              Love the effect on the upper and handgaurd! Looks smart

              I highly recommend the ZCI hi torque motor and a Lonex Hop Unit.

              If you still want crisp semi auto without loads of active braking required maybe aim for 16:1 and a cut off lever chip.

              - - - Updated - - -

              Any nice POM piston, don't go full metal teeth, you want a cheap failsafe point and the piston is the best part for that.

              An 11.1v Lipo will be at home in there with associated upgrade 16awg wiring and deans / XT60

              Comment

              About the Author

              Collapse

              Phoenix_rising Find out more about Phoenix_rising
              Working...
              X