Page 53 of 53 FirstFirst ... 343515253
Results 2,601 to 2,649 of 2649

Thread: Colt M4 & Variants

  1. #2601
    Join Date
    May 2010
    Location
    Berkshire
    Posts
    12,020

    Default Re: Colt M4 & Variants

    Quote Originally Posted by richard4wood1970 View Post
    Oh right I see. Does it have correct XM177 Trades etc? Did you have to alter the handguard to fit? Are you altering the general finish or leaving it black mate. Was it the Israeli look you wanted?

    Richie.

    Sent from my SM-J500FN using Tapatalk
    No sadly it doesn't. That I will have to add later. It's a bit annoying that it has a white laser serial number where the trades should be, so it's a removal and replacement job with an engraver for that. There's a few things that bug me about it, so I may just shell out for a G&P or CA later instead.

    Hand guards were a drop in fit which surprised me, and are rock solid, the heat shield as well was a nice surprise and adds to the heft.

    IDF was the inspiration, but have a few things I need to make it more authentic, some of which I'm very unlikely to get my hands on. So for now, it's an IDF inspired version of old and new. Perhaps what would be issued nowadays or a decade ago, with the latest modern attachments that the guys can get their hands on issued. Whilst searching through pictures everyone seems to have a different set up, so I imagine it's more a case of what's in the stores rather than everyone getting the same Gucci kit


  2. #2602
    Join Date
    Nov 2010
    Location
    county durham
    Posts
    553

    Default Re: Colt M4 & Variants

    Yeah I know what you mean about the IDF sett up! They tended to use whatever. Althought they never had the XM! They were given loads of M16A1's and the M16A1 carbine (653). They also redone a load of full size A1's to make them carbines as well! There the ones you see with the 13" barrels. Your XM flashider would be better replaced with an A1 to keep it authentic like bud. Still looks good though as I'm a huge fan of old school! Where did you get the handguard then bud? Also if you were replacing the receiver I'd go G&P myself. They look great, have the trades already embossed on and you can even slot real magazines in em 😆.

    Richie.

    Sent from my SM-J500FN using Tapatalk

  3. #2603
    Join Date
    May 2010
    Location
    Berkshire
    Posts
    12,020

    Default Re: Colt M4 & Variants

    Biggest uk firearm parts retailer that is supplied by the states.

    Yeah I'm aware that it's not particularly authentic, but as I only put the two halves together today... 😝

    But it's by far my favourite set up of colt to date. If only I'd discovered this rail and optic combo when I had my 9mm 635 😔


  4. #2604
    Join Date
    Aug 2011
    Location
    northamptonshire
    Posts
    93

    Default Re: Colt M4 & Variants



    Valken CQB. Now just need to pick up a new battery to fit the stock as all mine are the square type lol

  5. #2605
    Join Date
    Oct 2016
    Location
    Lincolnshire
    Posts
    23

    Default Re: Colt M4 & Variants

    My G&G combat machine CQB.
    Originally bought second hand in two tone with the painted camo receiver.

    Painted all the two tone parts black this week. Did consider trying to match the scheme on the receiver but im nowhere near as talented as the last bloke who painted it.

    Gone from this:
    http://imgur.com/9kGKSgD

    To this:
    <a href='http://i.imgur.com/KLsD6Br' title=''><img src='http://i.imgur.com/KLsD6Br.jpg' alt='' title='Hosted by imgur.com' /></a>

  6. #2606
    Join Date
    Sep 2008
    Location
    Reading
    Posts
    571

    Default Re: Colt M4 & Variants



    Sent from my SM-G930F using Tapatalk
    AK-Aims
    Rk-95

  7. #2607
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    167

    Default Re: Colt M4 & Variants

    Colt RO635 SD

    Picture taken by @Syferphotography on instagram


  8. #2608
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    805

    Default Re: Colt M4 & Variants

    Finished my TM Recoil Blood Diamond CAR-15:

    2016-10-26 12.29.08.jpg

    2016-10-26 12.29.36.jpg

    2016-10-26 12.30.06.jpg

  9. #2609
    Join Date
    Oct 2016
    Posts
    29

    Default Re: Colt M4 & Variants

    After a bit of drama finding a stock to fit got one today and after a quick respray (it had already been sprayed) heres my Krytac mk2 CRB. Only thing to change is some sort of silencer/amplifier.


  10. #2610
    Join Date
    Nov 2013
    Posts
    131

    Default Colt M4 & Variants

    TM Recoil M4

    Started life as a CQBR. Front wired to deans, Magpul bits, sling plate etc......



    Sent from my iPhone using Tapatalk Pro

  11. #2611
    Join Date
    Oct 2016
    Posts
    29

    Default Re: Colt M4 & Variants

    Excuse the indulgence, gun now with silencer. Pretty much how I want it now.


  12. #2612
    Join Date
    Apr 2011
    Location
    Nottingham
    Posts
    518

    Default Re: Colt M4 & Variants

    Quote Originally Posted by Hawk View Post
    The P word again! You should say your love for airsoft 3 times and a holy Tokio Marui

  13. #2613
    Join Date
    Jun 2014
    Posts
    21

    Default Re: Colt M4 & Variants


  14. #2614
    Join Date
    Sep 2016
    Posts
    1

    Default Re: Colt M4 & Variants

    Quote Originally Posted by Steve203 View Post
    Heres mine custom built from the ground up,
    Loving this!

    What rail and suppressor are you running? I'm trying to find a rail I can fit my TM tracer under and having a bit of trouble finding one wide enough!

  15. #2615
    Join Date
    Dec 2013
    Location
    Northern Ireland
    Posts
    541

    Default Re: Colt M4 & Variants

    Cheers phoenix92, its a madbull mfr 9" with a scar flashider and an aac suppressor,

    Sent from my SM-G928F using Tapatalk

  16. #2616
    Join Date
    Apr 2015
    Posts
    236

    Default Re: Colt M4 & Variants

    I already showed this off as a dmr but hey, here's the assault rifle version! instagram @digital.airsoft


    Sent from my iPod touch using Tapatalk

  17. #2617
    Join Date
    Nov 2010
    Location
    county durham
    Posts
    553

    Default Re: Colt M4 & Variants

    I love the AR-15 Platform, always have! You can do SO much to them, and they look so......COOL!!!

    My Marushin XM177 with a Plethora of parts....for when I get bored with one model....lol. Just waiting for a cheap short shotty to mount under the M16A1 Carbine??





    Richie.

  18. #2618
    Join Date
    Sep 2014
    Posts
    7

    Default Re: Colt M4 & Variants

    Just picked this up its a co2 powered brocock m4 build number 66 out of a 1000 . Massively over powered 650- 700 fps on .25 IMG_0051.jpgIMG_0050.jpg

  19. #2619
    Join Date
    Aug 2016
    Location
    South Cambridgeshire
    Posts
    58

    Default Re: Colt M4 & Variants

    [/U]
    Quote Originally Posted by Winford1978 View Post
    Just picked this up its a co2 powered brocock m4 build number 66 out of a 1000 . Massively over powered 650- 700 fps on .25 IMG_0051.jpgIMG_0050.jpg
    Wow. I never heard of that before, not much on the Internet either. What are the internals, field stripping like?

  20. #2620
    Join Date
    Sep 2014
    Posts
    7

    Default Re: Colt M4 & Variants

    It's a rare gun they only made a 1000 , its runs on 2 x 12gram co2 bulbs , fixed hopup and semi only . Full metal but really not useable in a game just way too hot lol

  21. #2621
    Join Date
    Aug 2016
    Location
    South Cambridgeshire
    Posts
    58

    Default Re: Colt M4 & Variants

    Sounds like a great tin can destroyer in the back garden, what's the range / accuracy like? Should be less susceptible to windage than a light BB. I like my over powered PTS /Mega which (when accurate) will shred cardboard boxes at range.

  22. #2622
    Join Date
    Sep 2014
    Posts
    7

    Default Re: Colt M4 & Variants

    Not had chance to give it a proper test but it shoots plastic bbs straight though a thick plastic plant pot and it can embed steel bbs into wood at 20 feet lol

  23. #2623
    Join Date
    Feb 2016
    Posts
    3

    Default Re: Colt M4 & Variants

    Another Frankenstein for your perusal. Finally managed to track down a JP receiver set so my personal rifle is now complete.


    Sent from my iPhone using Tapatalk

  24. #2624
    Join Date
    Apr 2014
    Location
    Ashford, Kent
    Posts
    526

    Default Re: Colt M4 & Variants

    New build, wanted some small fast and light. Base build was a Nuprol delta for the upper, lower outer case and stock, internals are a high speed gear set with a BTC spectra for v2 gearbox. Madbull front end, Magpul pistol grip and Black rain flash hinder.




  25. #2625
    Join Date
    Mar 2016
    Posts
    22

    Default Re: Colt M4 & Variants

    My recently finished custom built DMR. Inside it has a custom built gearbox with Lonex, Prometheus, SHS parts with M120 spring and AB mosfet, an R-hopped 6.05 PDI barrel and prowin chamber. Not yest tested "in anger" but chronoed at around 420fps locked to semi.

    2017-01-24 14.52.20 (Small).jpg2017-01-24 14.52.34 (Small).jpg2017-01-24 14.53.05 (Small).jpg2017-01-24 14.53.15 (Small).jpg

  26. #2626
    Join Date
    Jan 2009
    Location
    down south, worthing
    Posts
    159

    Default Re: Colt M4 & Variants

    My G&P Ball Rifle Short, first gun i got after a few years out, been really pleased with it, has become the workhorse that i dont mess about with too much internally so i know ive got one gun running well at all times. Run a light on the front when needed. Not the most accurate but great for close-medium duties, and now the amplifier has been swapped for a normal flash hider its not so bloody loud!

    2017-02-25 15.42.45.jpg

  27. #2627
    Join Date
    Mar 2016
    Posts
    22

    Default Re: Colt M4 & Variants



    My frankenstein m4/36c using a G&G body, with G&P Marine stock, Daniel defence 7" Rail and a G&P xm177 flash hider, with the (marmite) g36c rail adapted to fit.

    Some like it, some hate it..... Personally, as a cqb weapon, I love it! Next is to build the gearbox up as I would like a high RPS for s**ts and giggles

    Be interested to hear thoughts. Cheers

    Sent from my SM-G930F using Tapatalk

  28. #2628
    Join Date
    Mar 2013
    Location
    Canada
    Posts
    19

    Default Re: Colt M4 & Variants

    Quote Originally Posted by richard4wood1970 View Post
    That Canadian model look awesome fella. After the standard "Old School" M16/M16A1/203 look, it's my next favourite looking long M16 variant.

    How much did it cost you to put all that together...If I may pry??

    Richie.
    Apologies for the late reply. Thanks a lot man, I shudder at the cost. I've rebuilt my WE M4 at least five different times now, but this is the last time LOL. I can't give an exact cost, but the real Colt Canada parts cost me over 200 CDN, plus the receiver engraving and the base rifle. She ain't cheap but she's one of a kind

  29. #2629
    Join Date
    Nov 2010
    Location
    county durham
    Posts
    553

    Default Re: Colt M4 & Variants

    WOW ARC-74, it was a late reply, was beginning to think I wasn't getting one?? Yeah it's a really nice looking model. I was about to ask how you got the parts over here, but noticed your located in Canada....Doh!!!

    Richie.

  30. #2630
    Join Date
    Jan 2014
    Posts
    21

    Default Re: Colt M4 & Variants

    IMG_0929.jpg

    My latest purchase. My gun but the photo is from the previous owner. It's a bomber/prime gbbr Apr with real magpul stock and grip.

  31. #2631
    Join Date
    Mar 2006
    Location
    Belfast
    Posts
    819

    Default Re: Colt M4 & Variants

    Krytac LVOA S modelled Loosely on the one in the division.

    Pathfinders. NI


  32. #2632
    Join Date
    Mar 2006
    Location
    Belfast
    Posts
    819

    Default Re: Colt M4 & Variants

    Top to bottom;

    WE MP5 / TM Recoil Scar H / Krytac LVOA S

    Pathfinders. NI


  33. #2633
    Join Date
    Feb 2015
    Location
    Norwich UK
    Posts
    216

    Default Re: Colt M4 & Variants

    After 3 months of saving like a man possessed I have my new toy.

    Really happy with how she looks.

    Krytac lvoa-s with guarder clear rubber, pts cmr rail cover kit, UFC sight on cantilever mount, ares short foregrip, 8 ares amoeba 120 short midcaps. One very broken wallet

    IMG_0958.jpg
    IMG_0959.jpg
    IMG_0960.jpg

  34. #2634
    Join Date
    Sep 2015
    Posts
    141

    Default Re: Colt M4 & Variants

    Fuck me it looks worth the broken wallet so what is the final cost of the baby

    Sent from my GT-I9505 using Tapatalk

  35. #2635
    Join Date
    Feb 2015
    Location
    Norwich UK
    Posts
    216

    Default Re: Colt M4 & Variants

    8 mags, guarder hop rubber, cmr kit, sight, foregrip, bb shield, dump bag, 5000 .28g bb's let a dent if about 650 in my bank. Mags alone were 130 though.

  36. #2636
    Join Date
    Nov 2010
    Location
    county durham
    Posts
    553

    Default Re: Colt M4 & Variants

    The MP5 at the top looks the best for me!!!

    Sent from my SM-J500FN using Tapatalk

  37. #2637
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    805

    Default Re: Colt M4 & Variants

    My latest edition, a TM MWS gbbr with real MFT stock, Magpul K2, VFG and RSA, replica Trijicon MRO and X300. Oh aye, and a SF can for good measure...


  38. #2638
    Join Date
    Sep 2015
    Posts
    141

    Default Re: Colt M4 & Variants

    Now that is sexy as hell

    Sent from my GT-I9505 using Tapatalk

  39. #2639
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    805

    Default Re: Colt M4 & Variants

    I think it'll do... Cheers!

  40. #2640
    Join Date
    May 2010
    Location
    Berkshire
    Posts
    12,020

    Default Re: Colt M4 & Variants

    Oof.


  41. #2641
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    805

    Default Re: Colt M4 & Variants

    Ha! Oh aye, forgot to mention it's got real LWRC Railskins on it too...

  42. #2642
    Join Date
    May 2010
    Location
    Berkshire
    Posts
    12,020

    Default Re: Colt M4 & Variants

    Mauri recoil with slim handguards, x4 fibre Acog for outdoors, Eotech and torch for indoors with FAB handguard mount





  43. #2643
    Join Date
    Jan 2007
    Location
    Salisbury
    Posts
    98

    Default Re: Colt M4 & Variants

    There are some nice looking bits of kit on here... am a bit of an M4 whore myself- will try and upload some pics...
    thread should be renamed "M-Whore Porn"...

  44. #2644
    Join Date
    Dec 2016
    Posts
    5

    Default Colt M4 & Variants



    Picture of my custom M4 magpul/Viking tactics civilian AR

    Instagram: peter_airsoft


    Sent from my iPhone using Tapatalk

  45. #2645
    Join Date
    Mar 2011
    Location
    near chester
    Posts
    3,608

    Default Re: Colt M4 & Variants



    Systema ptw:
    Genuine Noveske NSR
    Magpul MOE grip
    comm spec magpul STR
    Magpul AFG
    Noveske trigger guard
    Noveske take down pins
    Noveske engraved lower
    Cerakoted in dark grey (can't remember actual colour name)
    51T flash hider
    G&P IR Dbal
    Haley strategic thorntail (still to get an m300)
    Magpul BUIS
    A prisoner of war is a man who tries to kill you and fails, and then asks you not to kill him.

  46. #2646
    Join Date
    Sep 2015
    Posts
    141

    Default Re: Colt M4 & Variants

    Hawkeye i also a M4 whore i cant see me buying anything else than the M4

    Sent from my GT-I9505 using Tapatalk

  47. #2647
    Join Date
    Apr 2014
    Location
    Ashford, Kent
    Posts
    526

    Default Re: Colt M4 & Variants

    This is my TM 416 delta custom build






  48. #2648
    Join Date
    Feb 2010
    Location
    where I drop my ruck
    Posts
    1,139

    Default Re: Colt M4 & Variants

    AIRSOFT WEAPONS M4 (recoil)

  49. #2649
    Join Date
    Oct 2009
    Location
    Plymufff!
    Posts
    6,148

    Default Re: Colt M4 & Variants

    Someone say old skool?



    section 24 of the 1968 Act
    Supplying imitation firearms to minors
    1)It is an offence for a person under the age of eighteen to purchase an imitation firearm
    2)It is an offence to sell an imitation firearm to a person under the age of eighteen.

Page 53 of 53 FirstFirst ... 343515253

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 
Zero One Airsoft - Your One Stop Airsoft & Tactical Online Superstore
Zero One Airsoft Ltd. Office Telephone: 01202 769614
Units 8 & 9, Branksome Business Park
Bourne Valley Road Tech Telephone: 01202 769615
Poole
Dorset Email: info@zerooneairsoft.com
BH12 1DW
United Kingdom Web: www.zerooneairsoft.com