Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

cm16 tight bore

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cm16 tight bore

    To increase the range on my G&G cm16, would I just need a tight bore barrel? or are there any other parts that would be needed?

    I think it's around 310 fps, so what should I expect with a tight bore barrel?

    Thanks.

  • #2
    Re: cm16 tight bore

    Barrel is unlikely to give you much more range, but would improve accuracy/grouping. A better hop, however...
    Originally posted by Nun-Chuck
    I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
    Originally posted by deanfirst
    why not use zeroone's escort service?

    Comment


    • #3
      Re: cm16 tight bore

      id swap the hop rubber and nub over, and stick a madbull v2 in there for good measure.
      -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
      -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-

      Comment


      • #4
        Re: cm16 tight bore

        Originally posted by jonny lovegrove View Post
        id swap the hop rubber and nub over, and stick a madbull v2 in there for good measure.

        How much would this cost?

        Comment


        • #5
          Re: cm16 tight bore

          depending on what you get, new rubbers are about 5 plus postage, most come with a nub.
          madbull V2s are about 30 new.
          -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
          -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-

          Comment

          About the Author

          Collapse

          trigger happy Find out more about trigger happy
          Working...
          X