Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

How do I fix my TM G18C

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How do I fix my TM G18C

    So I just bought the 9 ball shortstroke guide rod from lonex I put it in my tm g18c. And it worked fine on the 1st mag now when I shoot it the slide doesnt return to the neutral position to allow it to be fired again it just stops short so I cant fire til I push it forward a tiny bit. It does the same when I put the original spring in

    I'm not an amazing gun tech it seems everytime I take a rifle apart I break something so some help would be appreciated thanks!
    Attached Files

  • #2
    Is the nozel at the rear of the slide meant to snap back into place or just slowley slide. Is that the problem
    Last edited by Apple cat; 9 April, 2020, 18:51.

    Comment


    • #3
      Nozzle should reset quickly , if it's not it probably just needs a clean and re-lube. These being full auto pistols tend to need regular maintenance to keep them running smooth . From your first post , I'm afraid I couldn't tell you from the picture , can you push that slide to battery or is it stuck hard like that? If its stuck , something in the hammer assy will be meshing badly with the BBU.

      Good luck !

      Comment

      About the Author

      Collapse

      Apple cat Find out more about Apple cat
      Working...
      X