CYMA CM.098B question

[GrimTangoDown]

Hi all,

Does anyone know what are my options if I wanted to get this DMR to shoot single only:

https://www.patrolbase.co.uk/cyma-cm...ition?pv=11613

Ideally non-destructive, like a programmer, but unfortunately it seems to come with a proprietary mosfet?

Thank you

[spencer627]

Hi mate

I'm not familiar with that RIF but you could just lock in your selector plate so it only travels afar as semi auto only

I'm pretty sure you can't tag another mosfet onto a RIF with a factory mosfet (think negative airsoft tried a warfet in one and it didn't work) I could be wrong tho

You'd probs have to rewire the gearbox to a more standard setup and then maybe run a plug in FET


But I'd just check online to see how other people have been locking off their RIFs for semi only manually

I run a m14 platform and you just basically remove the selector plate and your done as the safety is separate

Hope this helped in anyway

Sent from my SM-J510FN using Tapatalk

[GrimTangoDown]

Thanks mate, I suppose I will get it and then will have some fiddling to do with it