Login or Sign Up
Logging in...
Remember me
Login
Forgot password or user name?
or
Sign Up
Log in with
Forums
Classifieds
Groups
Zero One Airsoft
Ground Zero Airsoft
Airsoft Festival
Today's Posts
|
Member List
|
Calendar
|
Forum Rules
|
Forum
Airsoft Related
Technical Help
Tech - Electric Guns
Announcement
Collapse
No announcement yet.
Zero One Ads
Collapse
High ROF AEG double feeding
Collapse
X
Collapse
Posts
Latest Activity
Photos
Search
Page
of
1
Filter
Time
All Time
Today
Last Week
Last Month
Show
All
Discussions only
Photos only
Videos only
Links only
Polls only
Events only
Filtered by:
Clear All
new posts
Previous
template
Next
survivalkid1
Cadet
Join Date:
Oct 2009
Posts:
7
Share
Tweet
#1
High ROF AEG double feeding
24 June, 2018, 20:54
Hi all. Firstly, apologies for the username. I havent been on here for a fair few years!
Coming back to airsoft I have decided my CM16 that has been sat on the shelf for many years is due for an upgrade.
Upgrades so far -
shs high torque motor
shs 12:1 gears
sector delay chip
8mm bearings
shimming
element steel tooth piston
double o ring cylinder head
O ring air nozzle
basic mosfet
Problem- I was running a 9.6 nimh which the gun runs fine with but the aim is to upgrade to an 11.1 lipo. I tried one of my friends lipos and this is where I could see problems .
On single shot, the gearbox appears to do 1.5 cycles per trigger pull.
On full auto, which appears to be roughly 30 rps, every few shots I get a double feed of two low powered bb's and the accuracy of it all is terrible.
I have a few ideas with what might be wrong but I am unsure. I first thought that I was firing a bb before the other had left that barrel. After doing some maths I realise I was very wrong.
My next thought is that the tappet isn't returning fast enough and is pushing two bb's down the barrel before the air nozzle re engages.
The hop unit is all standard and the whole system operates fine at a lower rps but my aim is to be running with a high rps on an 11.1v.
I plan to put an ab mosfet on which should deal with the 1.5 semi cycles but I'm lost with the double feeding. Everywhere I look says the hop is the issue but the only variable in this is the battery and thus the rate of fire.
thanks in advance
Ethan
sj_asc
Gun Tech
Moderator
Join Date:
Dec 2004
Posts:
1652
Share
Tweet
#2
24 June, 2018, 21:02
To help to narrow it down a little, does the occasional poor fps still occur when the mag is half full or less assuming you are using low-caps.
dsgdreamteam
Comment
Post
Cancel
survivalkid1
Cadet
Join Date:
Oct 2009
Posts:
7
Share
Tweet
#3
24 June, 2018, 21:44
Only ran it on high caps but problem exist when it is only wound a bit, when it is half wound and when it is wound to the click. The shots just seem to be wild in full auto . Consistency just goes out the window and then the double feed drops probably 20 feet in front of me ( as if I had my hop turned upside down )
Comment
Post
Cancel
Previous
template
Next
About the Author
Collapse
Find out more about
survivalkid1
Working...
Yes
No
OK
OK
Cancel
X