Announcement

Collapse
No announcement yet.

Mp5k issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mp5k issue

    I've added a long wire loom so I can run the AEG rear wired with a lipo in the stock tube, and whilst it works OK on full auto, it suffers gear box lock up on semi.

    Would the changing of the connectors to deans and the addition of a Mosfet, either plug n play or hardwired, help alleviate this issue?

    If so, Mosfet recommendations please
    sigpic

    AK47 Custom Operator Weapon / Sig Sauer P228 9mm

  • #2
    Semi uses more amps than full auto, locking up could be from poor battery, what battery and charger are you using,
    I would recommend perun v3 mosfet
    VICTORIA CONCORDIA CRESCIT


    LOOKING FOR: S&W N-frame holster
    trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

    Comment


    • #3
      I'm using Vapex 7.4V 1300mAh 20C/40C batteries.

      I'll look into the mosfet
      sigpic

      AK47 Custom Operator Weapon / Sig Sauer P228 9mm

      Comment


      • #4
        1300 x 20c is 26 amps which is borderline amount, especially if the charger isn't a smart one, or your battery is a bit naff,or wires and plugs aren't good quality I'd want at least 35-40, it puts less strain on your batteries and motor and your gun never uses more than it needs
        VICTORIA CONCORDIA CRESCIT


        LOOKING FOR: S&W N-frame holster
        trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

        Comment


        • #5
          New batteries then. Super
          sigpic

          AK47 Custom Operator Weapon / Sig Sauer P228 9mm

          Comment

          About the Author

          Collapse

          Hellfish Find out more about Hellfish
          Working...
          X