Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Dboys m203 and CO2 shells help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dboys m203 and CO2 shells help

    Hey guys n gals,

    Just hoping to come up with a solution to an issue I've encountered.
    Upon charging the S-thunder shocker shell with CO2, the plunger (firing pin) becomes stiff (obviously due to the pressure) and I can depress it with finger / thumb but when i load it into the launcher, i can pull the trigger but I'm unsure as to why it won't fire. Is the firing mechanism not strong enough? Is the firing pin and sear bending / deforming as the trigger is pulled as it it being pressed against a supposedly immovable object (or an incredible stiff one)
    One option is to reduce the gas put in the shells but this I just too fun and deafening to pass up on so the gas needs to remain.

    Any advice will be appreciated

    Reaver
    Sandy -- Rogue Recon

  • #2
    Re: Dboys m203 and CO2 shells help

    I'm sure the old fix to this was extend or fit a longer cap to the launchers firing pin, hitting google should bring up some fix's
    Please do not advertise on this forum

    Comment


    • #3
      Re: Dboys m203 and CO2 shells help

      Ah Roger!

      I can't believe I didn't think of that in the first instance, I'll hit it up and give it a go later!
      Sandy -- Rogue Recon

      Comment

      About the Author

      Collapse

      Reaver Find out more about Reaver
      Working...
      X