Announcement

Collapse
No announcement yet.

How to lower a CO2 pisol FPS

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to lower a CO2 pisol FPS

    I bought a KWC M&P40 CO2 and it's firing very hot around the 400fps mark. I'm not really an expert on any form of tech work and I don't really know where to begin with lowering the FPS on this pistol. Any help or suggestions are welcome.

  • #2
    You can partially fill the Air Nozzle with chemical metal/quik steel etc or completely fill it, pack it in hard and then drill a smaller hole through the middle.

    Comment

    Working...
    X