Issue with G26 (marui) not cycling and firing properly

[Marcov]

The gun is cycling but not all BBs are coming out.

Also If you look at the video the magazine is empty and it’s not locking In empty position.

I have changed the recoil spring guide and springs

I have changed the nozzle but the problem still persists

The trigger bar and spring seem ok, so the chassis/hammer and slide release bar and spring.

I will try changing the loading nozzle spring before checking again the hammer part (I do have a whole hammer and chassis kit from JKW, if compatible I could try to swap it)

Any suggestions?

Thanks

[img]https://i.imgur.com/Mwd90J7.mp4[/img]

[Marcov]

Sorry I'm having trouble adding the link to the video

https://i.imgur.com/Mwd90J7.mp4