Can't get my Tm L96 off? :p

[Queboo12]

Following this guide I found online and have got to the last step which says 'Gently pry out the C-ring on the hop chamber to release the barrel.'

Now i've pry'ed out the C-ring however, I just cannot get the hop up unit to seperate from the barrel, so before I do anymore damage by yanking it, is there something i'm missing?

Cheers :D

[Jelliffe99]

Re: Can't get my Tm L96 off? :p

http://www.airsoftsniperforum.com/showthread.php?t=2398

[Queboo12]

Re: Can't get my Tm L96 off? :p

Thats good however doesn't go any further on how to take the hop up of the barrel, other than taking the Cring off. Must be possible..

[Jelliffe99]

Re: Can't get my Tm L96 off? :p

You have to take of the c ring and remove the arm and nub and then just pull mate, but be careful not to lose the adjustment spring

[Queboo12]

Its weird I followed all the advice you said and stuff however still won't budge? Even tried spraying silicone spray down it however still useless