Login or Sign Up
Logging in...
Remember me
Login
Forgot password or user name?
or
Sign Up
Log in with
Forums
Classifieds
Groups
Zero One Airsoft
Ground Zero Airsoft
Airsoft Festival
Today's Posts
|
Member List
|
Calendar
|
Forum Rules
|
Forum
Airsoft Related
Technical Help
Tech - Single Action Guns
Announcement
Collapse
No announcement yet.
Zero One Ads
Collapse
new VSR with upgrades low FPS
Collapse
X
Collapse
Posts
Latest Activity
Photos
Search
Page
of
1
Filter
Time
All Time
Today
Last Week
Last Month
Show
All
Discussions only
Photos only
Videos only
Links only
Polls only
Events only
Filtered by:
Clear All
new posts
Previous
template
Next
Tinytom
Cadet
Join Date:
Apr 2011
Posts:
3
Share
Tweet
#1
new VSR with upgrades low FPS
22 March, 2012, 18:14
Hi internet!
could someone help me please
I have just brought a new TM VSR10 for my second gun. My local site has a 500fps limit on bolt actions snipers so I brought these upgrades to go with it:
-Laylax PSS10 150 Spring
-Laylax Prometheus 6.03 mm Tightbore (430 mm for Pro and Real Shock versions)
-Laylax PSS10 Zero Trigger (includes Orange High Pressure Piston)
-Laylax PSS10 Spring Guide
I have installed all these parts and it has chrono between 300-400fps using 0.2BBs trying various different things:
with different amounts of grease little too lots
PTFE tape around the cylinder head
different amount of hop up
some spacers in front of the spring
I tried a sp170 spring of a mates just to see if they sent me the wrong spring
the stock and the O ring that comes with the orange piston
I'm kinda stuck on what to do next have I done something completely wrong? or haven't got the correct parts?
Thanks
Tom
r6shooter
Lieutenant
Join Date:
Dec 2011
Posts:
335
Share
Tweet
#2
22 March, 2012, 19:08
Re: new VSR with upgrades low FPS
firstly mate,
the FPS is meant to be checked with the hop fully off for a truer reading
also, have you upgraded any other parts internally as you will lose power if many internals are stock when some are upgraded
first suggestion to you is to stop the air leaks from the cylinder by greasing it well and lubing the piston oring with silicon grease or spray,
also do the same with the cylinder head ( pressuming its upgraded ) if you had to drill the pin from the cylinder head there is your problem as you've gone too far
Comment
Post
Cancel
sniper1982
Account Not Validated
Join Date:
Feb 2012
Posts:
362
Share
Tweet
#3
22 March, 2012, 21:33
Re: new VSR with upgrades low FPS
300-400 fps is very inconsistent! Defo air leak. With that setup i would expect around 480-520 depending on air seal.
Drilling into the cylinder head isn't a problem. If you have managed to drill a crater in the cylinder head just fill with super glue (crude but works).
Next re-wrap ptfe tape around cylinder head thread.
However i think the leak is your hop rubber or o-ring.
As you have changed the barrel, have you used a sniper or aeg barrel? If you have an aeg barrel you'll need to replace the hop unit.
Out of interest, have you chronoed with the stock barrel?
moving on...
Rebuild the hop and wrap ptfe tape around the end of the hop rubber onto the barrel, about 4 wraps shoudl do it.
silicon spray is best for inside the cylinder.
It could be air slipping round the piston meaning the oring isnt working too good. However it is recommended to use the o-ring that came with the stock piston - so dont use the one that came with the orange laylax piston - swap it for the original one!
Comment
Post
Cancel
Tinytom
Cadet
Join Date:
Apr 2011
Posts:
3
Share
Tweet
#4
23 March, 2012, 03:16
Re: new VSR with upgrades low FPS
Hi
Thanks for the quick response
there is a slight crater in the cylinder head so I think this could be the issue!
should I get a ASPUK VSR STEEL CYLINDER HEAD as I have read in some guides that LAYLAX CYLINDER HEAD does not fit on the stock cylinder?
I did most of the chrono with zero hopup and the barrel is the correct one for the vsr10.
when I make an order I will order a LONEX VSR-10 BUCKING hopup rubber to help with the heaver BBs. would there been anything else anyone would advise changing at this time?
Thanks
Tom
Comment
Post
Cancel
Kagedwolf
Lieutenant Colonel
Join Date:
Mar 2011
Posts:
1118
Share
Tweet
#5
25 March, 2012, 18:30
Re: new VSR with upgrades low FPS
Who told you the Laylac PSS10 cylinder head doesn't fit the stock cylinder? That's poppycock, I have a spare one and both of them fit on the stock cylinder!
For the heavier BB's I would recommend the eagle 6 hop arm and a firefly hard hop rubber.
sigpic
Comment
Post
Cancel
Previous
template
Next
About the Author
Collapse
Find out more about
Tinytom
Working...
Yes
No
OK
OK
Cancel
X