TM L96 disassembly guide

[Rebo00]

Hi guys,
I've got a 6.01 tightbore and a new spring to put in my TM L96 but can't find a detailed guide on how to do it?
I've googled till my fingers were sore but found nothing that was usable :-(.
Anyone got any suggestions?
I've followed *** ****'s up to take the barrel out but then I got stuck with how to take the bucking off the barrel?
It also didn't give a guide how to disassemble the gearbox to change he spring.
Any help is appreciated .
Andy

[The Dr]

Re: TM L96 disassembly guide

http://www.redwolfairsoft.com/******...l?reviewID=238

[Rebo00]

Re: TM L96 disassembly guide

Yeah that's the guide I tried following but it just ends at taking off the C-Ring

[Queboo12]

Re: TM L96 disassembly guide

Exactly the same problem as I have mate. Have my L96 all the way down to the hop up unit, take the C-ring of and everything and just cannot get it off! I even took all the parts off the actual hop up unit to see if that did anything and did nothing. The only thing I think it could be is that small brass ring which sometimes get stuck under the their on other guns but not sure if they have that on the l96.