Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

If your good with Maruzen l96 HELP!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • If your good with Maruzen l96 HELP!

    Alright ,well I bought maruzen l96 as I heard they were good on the market. I bought a new trigger box, spring and all...
    My question is , how do I replace the spring currently in the cylinder?
    I just realised that the cylinder head is sealed! is there a way of un-sealing it?
    I anybody could help out it would be much appreciated

  • #2
    Re: If your good with Maruzen l96 HELP!

    If its anything like the VSR one you have to drill it out.

    Comment


    • #3
      Re: If your good with Maruzen l96 HELP!

      The maruzen cylinder is not sealed....It screws off,it may be quite hard to remove the first few times though,best thing to do is either use the proper tool or make one.
      Its easy enough to do just need a bar of metal with two rivets that fit the holes on the cylinder head and tap them into the metal bar the same distance apart as the holes on the cylinder head.Then drill a hole for the nozzle.

      Failing that needle nose pliers will work
      Last edited by pmac(BT); 20 August, 2012, 13:29.
      user name changed from b*tcht*ts

      Comment


      • #4
        Long nose pliers in the two holes it the top and twist. Simple. In fact, if you havent figured it out before i get home ill put a video on youtube for you.


        Generic Tapatalk Signature.
        -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
        -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-

        Comment


        • #5
          Re: If your good with Maruzen l96 HELP!

          The earlier Maruzen cylinders were sealed! Theyw ere crimped on just like the bolt handle end.

          He'll need a new cylinder and cylinder head.

          Comment


          • #6
            Re: If your good with Maruzen l96 HELP!

            Don't know where you go one from like that.
            I had one pre ordered in HK and imported to the uk straight away on release about 8 years ago. Making it probably the first one in the uk and it wasn't crimped.
            Only ever seen ACM cylinders crimped at both ends.
            user name changed from b*tcht*ts

            Comment


            • #7
              Re: If your good with Maruzen l96 HELP!

              Laylax do a tool for the APS-2 guns. I don't know if the Type 96 is the same though...(probably not because it uses a feeding ramp.)
              Originally posted by psirus101
              I once got a player 100+ metres away by just pointing my finger and shouting "PEW PEW PEW". He took his ****ing hit!

              Comment


              • #8
                Re: If your good with Maruzen l96 HELP!

                The Maruzen l96 doesn't use a feeding ramp like the TM.
                90% of the aps parts fit the l96 swell, the main part that isn't comp able is the cylinder due to the bolt handle.
                user name changed from b*tcht*ts

                Comment


                • #9
                  Get a pic up of the cylinder

                  Originally posted by Metalbody
                  pulling one off certainly feels good

                  Comment


                  • #10
                    Re: If your good with Maruzen l96 HELP!

                    Maruzen L96 Cylinders are threaded not crimped.

                    The APS cylinder tool will work on the L96 Cylinders.

                    If the cylinder head is stuck, then maybe its threadlocked or glued - run it under the hot-water tap for a minute or so, then use needle nosed pliers (gently) to undo it.

                    Comment


                    • #11
                      Yeah it just unscrews don't worry with tools needle nose do the job fine lefty loosie righty tighty!!!

                      Comment

                      About the Author

                      Collapse

                      nixxxx Find out more about nixxxx
                      Working...
                      X