Slam firing help please

[Freeman123]

I have a TM vsr-10 that seems to keep slam firing.

Ive have used3 different sears 2 different cylinders 2 different pistons and triggers and it still seems to be slam firing -_-

The only other thing I can think of would be the air seal rings???

Just wondering if anyone has had this problem? And was this the fix before I start spending money and it's not -_-

Thanks

[OllieHolmes]

Re: Slam firing help please

Have you checked all the screws are done up tight and everythings clean?

[sniper1982]

Re: Slam firing help please

do you have stock parts? If so, fit them - does the rifle work?

If yes, start replacing one part at a time until you narrow the problem down.

[Freeman123]

Re: Slam firing help please

Yeah I've made sure everything is cleaned and done tight. I've replaced everything stock cylinder,sears ect and still slam fires

[sniper1982]

Re: Slam firing help please

Have u got the two teflon rings installed, front and rear of receiver?

[Freeman123]

Re: Slam firing help please

Yes they are both der. I'm thinking about buying new ones and swapping them over?

[StuartL]

Re: Slam firing help please

Do you know if it's the sears giving way or the piston not mating correctly with the sears?

Test the sears by cocking the mechanism and seeing if it'll hold you pushing on the sears until the trigger is pulled. If not it's a sears issue, if so then the piston is either moving or not mating properly with the sears.