Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Vsr10 fps

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vsr10 fps

    Need help getting fps down on a Vsr with out cutting the spring or changing for another spring,
    only need to come down about 20fps

  • #2
    Re: Vsr10 fps

    just chop a coil off the spring, its a 2min job on a vsr

    Comment


    • #3
      Re: Vsr10 fps

      Leave it under tension over night it should bring it down a bit might not do 20 fps though
      "Well they're not selling them to fund WE's thats for sure......" - Caldymoose

      Comment


      • #4
        Re: Vsr10 fps

        you could fit a sorbo pad to the cylinder head,it would reduce the volume of air a bit,or any rubber washers would do the same job ,rubber tap washers could be easily obtained from a hardware shop and cut to fit,fit one and test then add more if needed.

        Comment


        • #5
          Re: Vsr10 fps

          i'd just leave the rifle cocked over night, or two.

          Comment

          About the Author

          Collapse

          Guest's Avatar
          Working...
          X