Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

old vsr help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • old vsr help

    hey guys im fixing my old vsr

    the thing used to slam fire like hell so i got a completly new set of sears and triger unit for it
    it was workin fine for re zeroin scope . just had my mate over and it slam firing again .

    help please

  • #2
    Re: old vsr help

    Have you checked the piston? Pistons can wear down so that there isn't enough of a lip for the piston sear to catch.

    Also, is the trigger unit on tight? If it's loose, the sears wont be making good contact.

    Hope that helps so far,

    Alex (mj23lj)
    Trader Feedback:
    New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
    Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

    Comment


    • #3
      Re: old vsr help

      the piston ok it has loads of lip on it for sear to hold

      Comment


      • #4
        Re: old vsr help

        You can always turn the piston round if one part of it is looking flatter than the rest. Anyway, if you say it's not that, possibly the trigger unit sitting low, maby the spring guide needs tightening. I think a loose spring guide usually causes it not to catch though, rather than slam firing. Maby, at a long shot, you could try replacing the springs in the trigger mech. Or check the trigger for signs of ware. Have you had it set on a short stroke for a long time?
        sigpic
        Tanaka M700 RealSword SVD TM VSR
        I want your broken Tanaka shotguns!

        Comment


        • #5
          Re: old vsr help

          Those are good calls by Dope there, maybe a list of the parts you have would be helpful...
          Trader Feedback:
          New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
          Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

          Comment


          • #6
            Re: old vsr help

            i hate short stroke trigger fire i like to long pull from army sniper the techniqe i use so not bin short stroke mate . i will try turnin the piston see if that works

            Comment


            • #7
              Re: old vsr help

              This has moved to here: http://www.zeroin.co.uk/forumdisplay.php?f=22
              Trader Feedback:
              New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
              Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

              Comment

              About the Author

              Collapse

              guard-sniper87 Find out more about guard-sniper87
              Working...
              X