TM VSR cocking problems. <broken gun>

[Trouble]

I just purchased a 2nd hand TM VSR, sold as very upgraded. I test fired it at the sellers, maybe 20-30 rounds. Impressive shot, very accurate very long range so I took it, got it home, test fired and in my 2nd magazine it stops working.

If anyone can help it would be much appreciated? I suspect it's trigger related. Here's a video of the problem:

[Trouble]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Spring guide related, perhaps? Just guessing looking on google? It feels like the cocking handle is not pulling back the spring.

[deant88]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Check the spring stopper bud

[Trouble]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Check the spring stopper bud

Ok, I'm taking her apart now. First time into a VSR for me... Got youtube guides one the go...

[deant88]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Haha good luck.
Its nice and easy to be honest.
Just remember when fitting a new one if it is off that I'm pretty sure it is that you get the cylinder slot lined up properly so the new stopper slides in nicely without any force last thing you want is a dented cylinder from forcing it on the edge of it :-).

[Trouble]

Re: TM VSR cocking problems. &lt;broken gun&gt;

spring guide out, looks ok.

[revell55]

Re: TM VSR cocking problems. &lt;broken gun&gt;

spring guide stopper?

edit

the bit you pull out of the trigger group to release the bolt.

[Trouble]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Looks ok, posting video now... Wonder whether it had come loose? it looks in good condition...

[deant88]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Not the guide mate the stopper.
The silver pin in the picture on the trigger unit

[Trouble]

Re: TM VSR cocking problems. &amp;lt;broken gun&amp;gt;

- - - Updated - - -

[deant88]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Second video is your cylinder head. The first one is the stopper.
Had it come loose out of place and not pushed in far enough?

[Trouble]

Re: TM VSR cocking problems. &amp;lt;broken gun&amp;gt;

Thread not letting me post more videos, bah humbug

- - - Updated - - -

I'm going to try to reassemble, maybe the stopper had come loose... Wish me luck!

[deant88]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Give it a good push normally click in place.

[Trouble]

Re: TM VSR cocking problems. &lt;broken gun&gt;

That was the problem. When I took to stopper out it slipped out, so had obviously come loose. I gave it a good click back in.

Working again, all ok. Parts look in fab condition and they all appear to be the parts it was sold with.

Thanks for all the help gents! A headache turned into a fun task!

[deant88]

Re: TM VSR cocking problems. &lt;broken gun&gt;

Glad its all sorted.
Now to have fun with it .