Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

BAR 10 cylinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BAR 10 cylinder

    hey iv just recently got a JG BAR 10 and am wanting to upgrade the spring but have heard that the cylinder might not be able to take a 500 fps spring and kinda need to know if i need to upgrade my cylinder aswell?

    cheers
    the rubber duck allways gets his kill

    JG G36C
    JG BAR 10
    ARES L86 LSW
    SYSTEMA MP5 MAX

  • #2
    Re: BAR 10 cylinder

    1) This should be in the tech section under spring rifles...

    2) Please STOP, RIGHT NOW, and read my upgrade guide and a few others, from say, ASR. I'm sorry to say, but you are going about this all wrong

    FPS is NOT everything, accuracy IS. If you can't hit something with 500fps then what good is it?!

    Look in the tech section, and ask a question on my upgrade guide if it doesn't answer your questions fully.

    Hope that helps,

    Alex (mj23lj)
    Trader Feedback:
    New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
    Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

    Comment


    • #3
      Re: BAR 10 cylinder

      thanks and......sorry
      the rubber duck allways gets his kill

      JG G36C
      JG BAR 10
      ARES L86 LSW
      SYSTEMA MP5 MAX

      Comment


      • #4
        Re: BAR 10 cylinder

        Don't be silly, no apologies are needed - sorry if I came across a bit strong.

        Good luck,

        Alex (mj23lj
        Trader Feedback:
        New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
        Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

        Comment


        • #5
          Re: BAR 10 cylinder

          lol nah its allright

          i get where your commming from tho, accuracy is THEE most important thing


          buuut i only asked my question because i did'nt know if the stock cylinder would be good enough to take a more powerfull spring or if it would just break the first time i pull the bolt back
          the rubber duck allways gets his kill

          JG G36C
          JG BAR 10
          ARES L86 LSW
          SYSTEMA MP5 MAX

          Comment


          • #6
            Re: BAR 10 cylinder

            The cylinder wont break, but other internals will within, I'd say, a few mags (if you're lucky).

            There are many upgrades (listed in my upgrade thread) that you need to get to use a 500fps spring reliably.
            Trader Feedback:
            New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
            Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

            Comment

            About the Author

            Collapse

            pryo_bob [email protected] Find out more about pryo_bob
            Working...
            X