Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Which VSR spring

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Which VSR spring

    Hi all, I have a VSR clone which is fully ASPUK upgraded. I went for the M150 spring which came with the kit but its shooting at 550fps with the hop up off and 533 with it on. I also have a nineball hop rubber. Any ideas on which spring I should buy to get it just below 500 with this set up?
    Many thanks,
    Gary
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Which VSR spring

    M130 then...
    sigpic

    Currently rocking: Tokyo Marui 416D Recoil Shock and a Tokyo Marui HK45 w/SureFire X300
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Which VSR spring

      or clip a couple of coils off. Must have a good airseal!
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: Which VSR spring

        Clipping it would be better mate. Won't lose fps over time then
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        • #5
          Re: Which VSR spring

          Ok cheers. I will give clipping the spring a go. Is it a case of clipping a coil at a time with chronoing inbetween?
          • Thank the user for this post 0
          • Like this post 0
          • Dislike this post 0

          Comment

          Previous template Next

          About the Author

          Collapse
          gazzabazza1000 Find out more about gazzabazza1000
          Working...
          X