Fully Upgraded L96 Mag Help

[adam859]

I just upgraded my Well L96 as far as i can take it, here is a list of upgrades
ASPUK Nikel plated cylinder
ASPUK Advanced Piston
ASPUK M150 Spring
ASPUK Steel Spring guide
ASPUK Metal Trigger box
ASPUK AEG Airsoft Pro Hop Up
ASPUK Silicon AEG Hop up bucking
ASPUK Barrel Spacers
ASPUK Tightbore 499mm 6.03 Barrel (AEG Barrel)

Now after installing all of these without much problem ive come across an issue, My mags seems to be struggling to clip in, i cant really find a reason why, ive tbeen thinking its the cylinder Head because it took a bit to get off the old cylinder and it roughed it up a little, but i cleaned it up a little and cant really see an issue.

thanks for your help

[sniper1982]

Re: Fully Upgraded L96 Mag Help

Try loosening off the mag catch. Also, there could an alignment issue, if there's any give, try and move the hop unit back a little, just one two mm might be enough (back as in, towards end cap direction).

What might help is loosening off the outer barrel by one or two turns.