L96 BB's Fly strange

[181jenkins]

hey guys im still pretty new to the whole sniper bid..

i have a warrior L96, with a aspuk hopup, iv done a TDC Mod on the barrel and it's fixed most of the "Stray" bb's, but most still dont hit on target, im using 0.36's, but not sure if they are the best.. as i can see impurity's, on most, i do need a new cylinder, but iv made sure the cylinder is air tight, etc is it maybe the inner Barrel ?, or just the low quality bb's?


p.s, i think i have a tightbore in there? im not sure i had a Silver looking barrel lying around so put it in but the barrel its self looks ok.

thanks 181jenkins

[Fizzy]

Re: L96 BB's Fly strange

What size target are you trying to hit, and from what distance?

[181jenkins]

Re: L96 BB's Fly strange

A old chimney pot from around 100 to 130 ft fps at around 400-450 poor mans chrono

Sent from my TegraNote-P1640 using Tapatalk

[181jenkins]

Re: L96 BB's Fly strange

I have a new aeg aspuk hop up and a stiff plastic h nub iv tried .3 and .36 It also has the tdc mod done, the bb's fly straight then it curves hard to the left, the only possible thing could be the barrel maybe , also I'm shooting at around 130 feet

[Coski]

Re: L96 BB's Fly strange

Sounds like your hop rubber isn't in straight. Make sure the little nub isn't off to the right.

[181jenkins]

Re: L96 BB's Fly strange

Iv tried a soft rubber aeg and a foam one, at the moment I have a plastic h nub, it all seems to be fine :-\ taking it out loads of time and back in looked at barrel etc, found A madbull 6.0.3 509 mm for £32 not sure what to do

Sent from my TegraNote-P1640 using Tapatalk

[dadio]

Re: L96 BB's Fly strange

if you can see imperfections in the BB's i'd start there , the number of people i have known who spend £300 on a gun then use the cheapest BB's on the market and then complain about poor performance.

[sniper1982]

Re: L96 BB's Fly strange

replace the h-nub with a standard nub, does the accuracy improve?