CA M24 - What Spring?

[DatJames]

Hey i bought a second hand CA M24 on here a few weeks ago with a 6.01 Barrel, 300% cylinder kit etc etc..Anyway its shooting wayyy too hot..(520 - 560 FPS on .2s) The site me and some friends want to go to (Well there is a few) the limit is 500 measured with .2s.. So what spring would get my gun down to around that?

Thanks in advance for any replies.

(Also thought i would throw in a pic of the gun Not my picture, its when the previous owner had but much better quality XD)

1779734_693160274062339_374384221_n.jpg

[mj23lj]

Re: CA M24 - What Spring?

A difference of 40FPS is huge. Are you sure? As if it's only 520, then you could just cut the spring down to 500FPS. If not, a 150sp will get you to just under 500FPS. Sounds like you may have an air seal issue though.

[DatJames]

Re: CA M24 - What Spring?

I re-chronoed and now its 510-520 consistently

[mj23lj]

Re: CA M24 - What Spring?

Ya, cut that down instead. Make sure you bend the end in (where you cut) so it has a flatter top. Then a few wraps of electrical tape at the top so to make it snug