Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Cyber Gun SVD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cyber Gun SVD

    Hi guys I'm looking at purchasing an svd however the brand is cyber gun and not a&k, I was wondering are they compatible with the same parts e.g Aspuk upgrade bits? I've had a look on google but I think the cyber gun must be fairly new as not a lot out there...

    If that's the case, I understand that it take aeg springs, now I also read somewhere they need spacers if I do use a new spring, is this true?

    Moving into the hop and barrel as ideally I'd like to keep the stock spring and bump up the fps by other means as I think the bolt is already pretty hard to pull back... Is it possible to perform the R hop mod on this rifle if I use the Aspuk advanced hop unit? And also is it now best to go with a 6.08 barrel rather than typical .01 tightbore?

    Finally are there any suggestions on improving the fps consistency? I want to get it as good as possible to keep shots more Accurate, I've had previous snipers which vary by up to 15 fps each shot, which does make a difference to where it's gonna land especially at range!

    Thanks for any help guys.

  • #2
    Re: Cyber Gun SVD

    Pretty sure the Cybergun is just a rebranded A&K
    Originally posted by Nun-Chuck
    I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
    Originally posted by deanfirst
    why not use zeroone's escort service?

    Comment


    • #3
      Re: Cyber Gun SVD

      That answers my first question then cheers

      Comment


      • #4
        Re: Cyber Gun SVD

        No, the ASG / Cybergun brand are not fully compatible with most after market upgrade parts.

        If you want to fully upgrade with i.e. ASPUK parts then best to go A&K.

        The king arms version isn't too bad though. Again, some parts are not fully upgradeable so A&K is the best route.

        Comment

        About the Author

        Collapse

        joshh1512 Find out more about joshh1512
        Working...
        X