Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Aerosol Grease Pro/Cons?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aerosol Grease Pro/Cons?

    I'm able to get through work some white lithium grease in an aerosol can. I was wondering if anyone here has used an aerosol version before over a standard "pot" and if so what pro or cons they have come across. Does it last as long, is it easier to work with etc... The actual product is Rust-oleum X1 1617 White Grease Spray. Being a decent brand i'm hoping it will do a good job as i can get hold of it readily.

    I will be using it firstly on my bolt/cylinder for my L96 but am considering using it on a version 2 rebuild if the response is positive.

    Ant

  • #2
    Re: Aerosol Grease Pro/Cons?

    yer I have used it, its nice and thick but the nozzle puts it down all over the shop. + you want to avoid getting it anywhere near any seals.

    which is difficult as it comes out like a blind man pissing off a cliff on a windy day..
    The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

    Comment

    About the Author

    Collapse

    Antny Find out more about Antny
    Working...
    X