Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

TM VSR Pro Help!!

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    TM VSR Pro Help!!

    So, I recently purchased a TM VSR 10 Pro, & while trying to do some upgrades - I couldn't remove the outer barrel.

    I've removed the screw on the receiver - and the screws on the top sights. Apparently after that it's meant to screw off.

    Can anyone give me any advice?

    Thanks,
    ecullen


    B252

    GR25_GR16_M9
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: TM VSR Pro Help!!

    check to see if the screw is underneath also pal. my bar10 had one underneath
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: TM VSR Pro Help!!

      Yeah, I've removed that one as well - still no budge.
      I'll probably try some WD40 on it - see if that helps.


      B252

      GR25_GR16_M9
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: TM VSR Pro Help!!

        be very carfew with that stuff. it eats o rings.
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        • #5
          Re: TM VSR Pro Help!!

          Okay cheers. I guess I'll take it to someone to have a go.
          Unless you have any more suggestions?


          B252

          GR25_GR16_M9
          • Thank the user for this post 0
          • Like this post 0
          • Dislike this post 0

          Comment

          Previous template Next

          About the Author

          Collapse
          ecullen Find out more about ecullen
          Working...
          X