Sniper Upgrades (based on a VSR) and Further Guide

[portermush]

Re: Sniper Upgrades (based on a VSR) and Further Guide

it should be okay, it will just wear a little bit.

[pmac(BT)]

Re: Sniper Upgrades (based on a VSR) and Further Guide

the stock cylinder will run fine well over 500fps.
but as said the teflon cylinder will give a smoother pull.
also i would get the accuracy parts first if your tight on money and fit these first,adding extra fps is just going to show any inaccuracys the rifle has.
you may alsowant to look at getting a new hoprubber,maby the laylax or fire fly hard

[iAndersonzxX]

Re: Sniper Upgrades (based on a VSR) and Further Guide

the stock cylinder will run fine well over 500fps.
but as said the teflon cylinder will give a smoother pull.
also i would get the accuracy parts first if your tight on money and fit these first,adding extra fps is just going to show any inaccuracys the rifle has.
you may alsowant to look at getting a new hoprubber,maby the laylax or fire fly hard

400FPS? Is that necessary?

I dont want to mess about with the hop up unit, Infact, Any parts of the rifle.

If its absolutly necessary I'll get one

[iAndersonzxX]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Guys, Sorry I cant edit and for flooding this page with questions.

If this idea of bringing sniper FPS levels down to the same as AEGs, What spring would I need for 350fps?

Will I need any new sears etc for a 350 FPS sniper?

Cheers

[bravotwozero]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Will I need any new sears etc for a 350 FPS sniper?

Cheers

No, not at all!


TM VSR will work fine up to 400 stock, after that it'll need re-enforced guts.

[iAndersonzxX]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Thats bloody lovely

Now, what spring is 350FPS? I'll upgrade it after I manage to get a scope

[bravotwozero]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Now, what spring is 350FPS?

Have you actually read this guide, or just asking questions?

It's on page one.

[iAndersonzxX]

Re: Sniper Upgrades (based on a VSR) and Further Guide

I thought it said 385 FPS not 365. Sorry

ignore that question :P

[TheCustardChucker]

Re: Sniper Upgrades (based on a VSR) and Further Guide

anyone found a video of how to install a tightbore barrel into a gspec vsr? not sure if its against forum rules but if you do. please send me a link. cheers.

[JMusa]

Re: Sniper Upgrades (based on a VSR) and Further Guide

doesnt the g spec already have a tb

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

the tm's are either 6.04 or 6.05 cant remember of the top of my head ,

[The Hidden One]

Re: Sniper Upgrades (based on a VSR) and Further Guide

This may have already been covered above but I need some help.

I have a TM VSR G-spec, fully upgraded from Zeroone. I have only skirmished twice with it and cleaned the barrell after each but the ting never really fires straight. I get maybe 50% straight'ish and the rest either curve right or left. I use Mad Bukk 0.4g bb's.

How can I improve accuracy and stop the bb's curving off? How should I clean the barrell? Should I replace the bucking (using standard VSR at 500fps)?

[private parts]

Re: Sniper Upgrades (based on a VSR) and Further Guide

I expect the hop up needs to bed in?

[migwar]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Also make sure your not canting the rifle, The hop is sensative to this

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

could be many things

dirty barrel ,
worped barrel
dirty ammo
torn hop rubber
hop rubber put in wrongly
too much hop applied to one side

mainly clean the barrel and take hop unit apart and clean with cloth , rebuild making sure hop is in the centre of the slit in the barrel