Sniper Upgrades (based on a VSR) and Further Guide

[TB-Stalker]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Regular TM stock.

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

hmmm, thinking it maybe the silver new mag catch ,

try using the old one ( if you have it )

[TB-Stalker]

Re: Sniper Upgrades (based on a VSR) and Further Guide

It is the stock mag catch...

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

hmm, it maybe the thickness of the flute barrel is slighty marginally thicker then the base tm ,

[TB-Stalker]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Ok, if it is, do you have any idea of how to fix it? I'm going to have a go at a full disassembly then reassembly to make sure everything is aligned and seated correctly to see if that helps.

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

only way to fix it mate,if the body needs a tiny bit from the support structure taken off, sand it or take a small file to the parts the outer barrel sits on to let is sit lower down in the stock

( if is the bull barrel ) is to gently sand it, where the mag goes in
but go for full dissasembly , check then rebuilt

[TB-Stalker]

Re: Sniper Upgrades (based on a VSR) and Further Guide

All sorted, took it apart and noticed that part 14 wasn't perfectly tight which meant the stock was a little bit further away from the barrel at the front than it should have been.

So... a fair amount of force later and the screw finally screwed all the way in. I then reassembled the rifle and now it feeds perfectly

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Glad mate

just be sure the force you used doesn't effect any performace etc

[TB-Stalker]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Right, been using my rifle for a bit now and everything is great, I can just seem one problem in the future. At the moment I have the hop set on full for the BB to fly correctly, so when I upgrade and move on to heavier BBs, won't the hop be set too low?

[dazz666]

Re: Sniper Upgrades (based on a VSR) and Further Guide

wrap ptfe tape around the hop rubber approx 6 times. I do this and it works every time. Just gives you that little bit extra hop.

[private parts]

Re: Sniper Upgrades (based on a VSR) and Further Guide

i find, the more power added that i dont need so much hop. id guess my hops on half way with .4s with hard hop rubber

[The Hidden One]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Change the Hop Up rubber to Firefly Hard one.

Also do the PTFE tape modification as suggested.

[Plester123]

Re: Sniper Upgrades (based on a VSR) and Further Guide

i've been upgrading my vsr pro and i think its now near fully upgraded excluding teflon cylinder. i have been using laylax parts and when it fires it sounds like a cannon. any ideas ?
thanks in advance

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

It will mate

All depends on what internals you have
spring size
cylinder head

[Plester123]

Re: Sniper Upgrades (based on a VSR) and Further Guide

it has sp130 spring and laylax cylinder head
cheers