Sniper Upgrades (based on a VSR) and Further Guide

[Assassin]

Re: Sniper Upgrades (based on a VSR) and Further Guide

rly sry for multiple reply laptop not well

[Taylorb]

Re: Sniper Upgrades (based on a VSR) and Further Guide

is this for a bar-10 or a vsr-10?

ie. marui or JG?

[Assassin]

Re: Sniper Upgrades (based on a VSR) and Further Guide

marui vsr-10

[Taylorb]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Hmm.. I think it may cope with that spring with no other upgrades, although to be honest it won't last very long. Sears are the first thing with higher power springs, and spring guide and spring guide stopper. That should cover it.

[MiniSnipa]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Right then at the request and correction:

G spec's id love to stick a fluted outer barrel in it obviously this means it will be the same length as a normal vsr , will it work and will it just be a case of swapping out the 330 for a normal vsr length inner barrel.

[mj23lj]

Re: Sniper Upgrades (based on a VSR) and Further Guide

I'm assuming you mean PDI (I haven't seen many other brands)...

It will just replace your outer barrel and is a quick swap - although if you get spacers they are pretty tough to get in as they are a VERY tight fit...

You will need:
Fluted Barrel
Barrel Base
Barrel Cap (or silencer adaptor)
Barrel Spacers (or DIY them) - it's a much smaller diameter than the G-Spec.

Then, depending on what length fluted barrel you choose:
P Length = 430mm Inner Barrrel
L Length = 555mm Inner Barrrel


Hope that helps bud,

Alex (mj23lj)

[MiniSnipa]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Yep PDI is who i am referring too

Right ok

Lets add this to cart only place i found this was "fire of x"

for the full upgrade

will the barrel go in nicely with the gpsecs hop up, I swear the only thing different with the g spec is the barrel length?

Right full cost for the fluted set with the list above as well as inner barrel
is
23208 Yen thats £147 which actually isnt that bad at all

[mj23lj]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Fire of X is VERY good...

Like I said bud, it's a simple swap over (including the parts I said above). So the G-Specs hop-up unit is fully compatible.

The G-Spec's outer barrel is shorter, but is also a "light" version. Where as the PDI Fluted barrel is quite thick. They do light barrels as well...

Alex (mj23lj)

[MiniSnipa]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Cheers as all ways matey

That will be my next investment then

[phil]

Re: Sniper Upgrades (based on a VSR) and Further Guide

should a standard g spec vsr be able to shoot through the bottom of a coke can point blank ?

[mj23lj]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Anyone? I haven't got a clue bud... Check ASR and some other forums for "the poor man's chrono"

[phil]

Re: Sniper Upgrades (based on a VSR) and Further Guide

hi all

i was reading on an american airsoft forum about putting as many barrel spacers in a vsr 10 to stop all vibration so the barrel is supported its entire length ?

would this make any difference from the just 2 upgraded spacers, ive got laylax ones in mine..

thanks

[B.E.N.]

Re: Sniper Upgrades (based on a VSR) and Further Guide

In terms of accuracy, probably not a great deal, in terms of vibration damping and sound control, I expect the more the merrier...

[bravotwozero]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Ohhh don't let MJ here that

He says use atleast 4 spacers in a G-spec. :D


Basically, they do two things....

The first, stabalise the barrel. Which means a more consistent shot, doesn't it?

Secondly, they actaully quieten the shot. As above, but reducing vibration which will quieten the shot.

[Sniper12]

Re: Sniper Upgrades (based on a VSR) and Further Guide

hi mate just wondering when ur gonna add the gear and tips aswell