MZ L96 - PTFE tape

[badas]

Got some PTFE tape today to use in my MZ L96 cylinder so their is less chance of any air coming out of the seal,

just curios if there is any other part on the gun i could wrap it up in to help focus air pressure better?

ty

[guard-sniper87]

Re: MZ L96 - PTFE tape

The hop rubber edge mate and also the hop unit gap itself to complete the airseal

Also you can take the stock oring from the piston wrap a tiny ammount under it twice then replace the o ring to improve the effectiveness of the vaccum

[badas]

Re: MZ L96 - PTFE tape

thanks guarder, which part of the hop rubber edge do you mean? the part that sits over the barrel?

and what hop unit gap :S?

finally whats the o-ring look like on the piston?

if you have any pictures that would be great i am a novice really to airsoft guns so don't know the names to parts.

thanks

[guard-sniper87]

Re: MZ L96 - PTFE tape

If your not sure mate take it to the site techy and ask him or her to fit them so you don't ruin parts

[badas]

Re: MZ L96 - PTFE tape

i know how to fully strip it down to bare parts and put it back together perfectly, i just don't know the names of parts