TM L96 Trigger problem

[dert70]

Hi there people

My TM L96 has a trigger problem i hope u guys can help with. after you have pulled the bolt back and returned it home the trigger wont pull.
Now the bb has been loaded ok because if i re-pull the bolt a few times it will jam and wont return as the bbs have blocked the way.

Any clues? is it something to do with the trigger pull/ trigger stroke adjuster


Many thanks

[St3a1th14]

Re: TM L96 Trigger problem

I can help you out here i had the same problem. The part that provides the function of only allowing the trigger to be pulled then the bolt lever is down. It's a little tab of metal and a spring that sits on the left hand side of the trigger unit and that is your problem. Take it out of give the bolt that little extra tap and it'll do the trick!