Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

What's this called on the Bar10/Vsr10? [picture included]

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    What's this called on the Bar10/Vsr10? [picture included]

    This pin (1 of 2) keeps edging out and hindering the cocking. What needs replacing?
    Cheers in advance.
    You do not have permission to view this gallery.
    This gallery has 1 photos.
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    On most vsr types they are static pins heat welded into either the cylinder cap or handle like yours.

    many drill them out to upgrade the cylinder.

    if yours has fallen out you can add a small bit of apoxy to the recess it sits in making sure it’s clean and only in the hole NOT overflowing at all.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    Previous template Next

    About the Author

    Collapse
    Queboo12 Magpul User and Abuser Find out more about Queboo12
    Working...
    X