VSR minimal upgrade list?

[Apurturesci]

Hello, please excuse me if this is in the totally wrong section.

I want to buy a TM VSR Real Shock, and I know that my wallet will find the nearest noose when I get into upgrading it, so, what is the bare minimal I need to get it running reliably at ~450 FPS?

A list of parts would be great!

Thanks, I appreciate any help!

PS: I forgot, don't worry about TB's unless you have a specific one to recommend

[Bandeen]

Re: VSR minimal upgrade list?

Hey mate,

Have a read of this great little thread! http://www.zeroin.co.uk/showthread.php?t=5069

Gives you alot of info for the VSR upgrade and parts list

[dazz666]

Re: VSR minimal upgrade list?

Upgrade the Following:

Piston Sear
Trigger Sear
Spring Guide
Piston
Spring
PTFE tape the hop rubber (about 10 wraps) if you plan to use heavier BBs.

Im sure there's a thread on here somewhere that will elaborate on parts. As Laylax are no more you'll need to source PDI.

I use PDI trigger and piston sears along with laylax neo piston, spring guide and a 170% pring (cut down a little).

This is the bare minimum.

[bravotwozero]

Re: VSR minimal upgrade list?

That's quite a long list for a 450fps upgrade...

If you're after a minimal upgrade list for running 450fps reliably, then i'd say the sears and the spring are the only parts you need to worry about.


TM VSR's are made of good stuff, the piston and spring guide will be fine at 450.

[Apurturesci]

Re: VSR minimal upgrade list?

Thanks, I'll have a shop around!

[joshh1512]

I'm looking to do the same, I found a great website in japan which has many PDI parts very cheap and in stock, it is a pdi retailer, PM me if you want it