Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

A&K Dragunov upgrade guide.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A&K Dragunov upgrade guide.

    I noticed that there has been no upgrade guide for the A&K Dragunov yet .
    so Im going to give a list of all the upgrades which should be done to the gun ,if you want to hit 500 fps.

    1)Pro arms dragunov upgraded piston.
    This allow you to have a lighter and stronger piston ,it can also take aeg piston heads.So you can get better air seal.


    2)Pro arms steel piston catch.
    Ok this will only be needed on older dragunovs (the ones with the hi caps) as the new ones (the ones with mid caps) already have steel piston catches.

    This allow you to get higher fps with less wear ,when I had my dragunov running just under 500 fps .Without this part I noticed the piston catch wears very quick .

    3)Fire fly hard aeg rubber
    As known by allot of techies this is the best aeg rubber money can buy .
    And i found it gave good results.
    £15

    4)Madbull 650 mm
    This is the longest airsoft barrel you can get and its made by a good manufacture (madbull) there barrels are one of the most popular airsoft barrel as they are cheap and give great performance .

    5)springs
    This is one very complicated section.
    I had an element m155 spring and that gave me just under 500 fps.

    6) recoil spring mod
    There is a little spring which sits above the main spring .
    If you take this out the gun will become a bit easier to cock.

    --------------------------------------------------------------------------------------------------------------------------------------------
    Ok this is going to sound complicated ,but you could if you wanted get the co2 kit for this .
    It will make the gun very easy to cock back .
    I only know the fps of this from you tube so I don't really know if this will be the fps for ever gun. The fps was about 449-415
    http://www.youtube.com/watch?v=Bhmshznywhc

    If you get this you wont need the pro arm upgraded piston.

    Thanks for reading and I hope this has helped .

  • #2
    Re: A&K Dragunov upgrade guide.

    Can you by any chance find links to the firefly rubber and the pro arms piston. I cant find them anywhere in the world :/
    thanks for the great guide.
    I am Fish. Point.Click.Thwack."Hit"
    Loadout -
    A&K Dragunov SVD
    G&G MP5-A4
    Red Tiger combat knife
    And A Whole Lot of BadAss

    Comment


    • #3
      Re: A&K Dragunov upgrade guide.

      Also, how do you clean a 650mm barrel?
      I am Fish. Point.Click.Thwack."Hit"
      Loadout -
      A&K Dragunov SVD
      G&G MP5-A4
      Red Tiger combat knife
      And A Whole Lot of BadAss

      Comment


      • #4
        Re: A&K Dragunov upgrade guide.

        Update pro arms have now got spring guides which allow you to use m160+ springs without them getting stuck.
        Also they have in the planning
        new air nozzle ,hop unit and cylinder.

        Comment


        • #5
          Re: A&K Dragunov upgrade guide.

          Fantastic, I aim my hop up unit as the barrel wobbles from inside the hop up unit.
          I am Fish. Point.Click.Thwack."Hit"
          Loadout -
          A&K Dragunov SVD
          G&G MP5-A4
          Red Tiger combat knife
          And A Whole Lot of BadAss

          Comment


          • #6
            Re: A&K Dragunov upgrade guide.

            I'm selling the SVD, check the classifieds if you want it scott.
            I am Fish. Point.Click.Thwack."Hit"
            Loadout -
            A&K Dragunov SVD
            G&G MP5-A4
            Red Tiger combat knife
            And A Whole Lot of BadAss

            Comment


            • #7
              Re: A&K Dragunov upgrade guide.

              Do all of the SVD's re-branded as "ASG" have the steel piston catches or are there diffrent versions within the ASG's

              Comment


              • #8
                Re: A&K Dragunov upgrade guide.

                Asg is a rebrand of the A&K so yes it does have a steel piston catch

                Comment

                About the Author

                Collapse

                SAS Scott Pure petrol head who is also crazy about airsoft. Find out more about SAS Scott
                Working...
                X