Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

    Hi guys

    Shopping List Tokoyo Mauri VSR G-Spec

    Ok so I have started buying the parts need to get my G-Spec to 500FPS

    Have bought so far
    Tokoyo Mauri VSR G-Spec
    Laylax PSS10 Damper Cylinder Head for VSR10
    PDI VSR Trigger Sear 1st Sear trigger sear
    PDI VSR Piston Sear 2nd Sear piston sear
    PDI Reinforced SETPIN (Version 2) for Marui VSR10
    LEAPERS UTG 3-9x40 Parallax R-G Illum MilDot Scope + MOUNTS




    Still Need To buy
    Laylax PSS10 High Pressure Piston VSR
    Laylax PSS10 150 Spring for TM VSR-10
    First PSS10 VSR Spring Guide for VSR10
    Laylax purple nine ball bucking
    PDI or Laylax tight Bore Barrel

    Have I covered all the parts I require ?

  • #2
    Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

    It's a good idea not to mix PDI and laylax parts.

    Comment


    • #3
      Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

      I did ask this very question in a previous post, the reply I had was
      Quote not an issue as long as you use the same manufacturer for the piston, cylinder head, spring guide

      Just found the post
      it shouldnt have problems mate,

      the only parts that can be a pain in the ass to work together is the piston and sear mix

      but seems as you have the PDI sears and PDI piston, pressuming both 90 degree angle ??

      if so then wont be a problem mate aslong as you dont over do the spring power
      Nope i have the exact same set up and mine works fine

      Comment


      • #4
        Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

        yeah, you need to run with the same make SEAR SET and same make PISTON (as sear set)

        other wise the two internals tolerances are different and will not work smoothly,

        plus i said it will be fine if your using pdi sears and pdi piston,
        but you have stated you will be using the LAYLAX piston, which wont work properly

        use pdi sears with pdi piston
        laylax sears with laylax piston
        edgi sears with edgi piston

        etc etc

        Comment


        • #5
          Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

          ok thanks the parts that are lsited under still to buy have not yet been ordered

          guard-sniper can you reccemend any PDI pistons ?

          Can I use the Laylax Cylinder head, Laylax Spring Guide, Laylax Spring with the PDI Piston ?

          Comment


          • #6
            Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

            the laylax spring should work if it is the same diameter as the PDI piston and spring guide when ordered

            so you would need either the 7mm or 9mm spring guide, spring....

            and the pdi pistons are searchable on google mate,
            they changed the names and specs since last time i used my vsr

            im more the L96 guy

            Comment


            • #7
              Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

              ok thats great thanks again I will look for a PDI piston and then get the Laylax 7mm Spring Guide with a Laylax 150 spring,

              Comment


              • #8
                Hi sorry but hijacking the thread for a sec
                will pdi sears work with tm piston?
                Just making shure
                Thanks
                I AM A NOOB ON A MISSION!!!


                Comment


                • #9
                  Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

                  PDI sears work with laylax pistons i know that for sure and TM stuff is compatable with laylax so i would presume so.

                  Cheers,
                  Russell
                  sigpic

                  Comment


                  • #10
                    Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

                    Interesting so you have PDI sears and a Laylax Piston ?

                    AAhh am driving myself insane

                    Comment


                    • #11
                      Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread



                      parts have arrived

                      Comment


                      • #12
                        Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

                        T Bird the instructions for the fitting of the 1st sear, 2nd sear, set pin are a bit vague, the cylinder set is simple enough, do you have a guide or any pictures that might help
                        have found this but would like more information

                        Now I seem to have a problem looking at this picture below, I have not purchased this torsion spring is this already inside the gearbox?

                        Comment


                        • #13
                          Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

                          you need to take that spring off the original sear and put it on the new one. once you open it up its all fairly straight forward. just dont lose any of the springs
                          Taking hits since 2007

                          UNIT 13

                          Comment


                          • #14
                            Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

                            Can't help you with a guide, I have the V trigger with 90 degree sear, which means my trigger unit came pre assembled with upgraded sears so I've never taken a trigger unit apart.
                            I am fairly sure though, that there are you tube videos of the procedure, in fact, I know there are so do a search on there aand if you can't find anything shout me and I'll see if I can find it.

                            Comment


                            • #15
                              Re: Shopping List Tokoyo Mauri VSR G-Spec - Picture Heavy Thread

                              ok thanks mate, I have opened the gear box and fitted the 2st and 2nd sear though am struggling with this part

                              Comment

                              About the Author

                              Collapse

                              Exibit Find out more about Exibit
                              Working...
                              X