Gease/Silicone Cylinder Set ?

[Exibit]

Hi

Gease/Silicone Cylinder Set ?

I'm about to receive my Palsonite Cylinder Set, PDi sears

I would like to know do I need to grease/silicone spray any of the parts before assembly of the parts ?

[TbirdX]

Re: Gease/Silicone Cylinder Set ?

All I did on mine was was to lightly grease (and I mean really lightly) the piston O ring and rear piston guide, run the piston without spring up and down a few times, wipe off any obvious excess and away I went.

Then a clean up and regrease every game or other game depending on usage.

[Exibit]

Re: Gease/Silicone Cylinder Set ?

Tbird

I have to types of grease/silicone, please see below which one should I use

[TbirdX]

Re: Gease/Silicone Cylinder Set ?

Either will do, just use it very, very lightly and see how you go.

[Exibit]

Re: Gease/Silicone Cylinder Set ?

ok thanks mate the Abbey grease is more like a paste and the other is a spray might go with the Abbey as I can spread it further

[badas]

Re: Gease/Silicone Cylinder Set ?

I allways use "Classic Army Cylinder Grease" its great and long lasting, jsu thte right thickness etc.

Kickass gun lube is too runny and gear grease (for AEG's) is too thick :/

[Exibit]

Re: Gease/Silicone Cylinder Set ?

piston O ring and rear piston guide

T Bird when you say the rear psiton guide do you mean the spring guide or the piston
Thanks again

[TbirdX]

Re: Gease/Silicone Cylinder Set ?

on the piston, no need to do the guide, although a smear around the base of the spring/delrin spacer itself won't do any harm, but thin enough to be barely seen. You do not need blobs of grease of any kind floating about in the cylinder, so be sure to wipe off any excess at all.

[Exibit]

Re: Gease/Silicone Cylinder Set ?

Classic Army Cylinder Grease

I have just order some of this

[badas]

Re: Gease/Silicone Cylinder Set ?

Good just don't go overboard with it