vsr double firing

[joshh1512]

Please help asap, need it sorted for tomorrow.

Basically my vsr fires two bb's per cock.

Yes i am cocking it right.

It has the purple laylax nineball installed with a pdi 6.01.

thanks

[TbirdX]

Re: vsr double firing

Check the hop unit, are you running the PDI hop unit?

[joshh1512]

Re: vsr double firing

Nope. Upgraded tm unit, with vsr pdi 6.01, and the purple nineball rubber. What could be wrong with the hop unit?

[TbirdX]

Re: vsr double firing

That little plastic part that moves up and down where the bb's enter. It has that tiny little poxy spring on top of it. If it's not fitted correctly then you can get double feeds.

This part...

[joshh1512]

Re: vsr double firing

It should be fitted fine, no reason why not... How may it be fitted wrong?

[TbirdX]

Re: vsr double firing

If the spring is caught between the two halfs of the unit or it's jammed, does it move freely?

[joshh1512]

Re: vsr double firing

It won't shut if the spring is jammed between the two halves, and yeh, sure it moves freely, it must if bb's can enter it?

[jackwarz]

Re: vsr double firing

Perhaps the spring on the back of the horseshoe shaped part, has been strained and therefor does not come fully down, allowing one bb through but then not preventing a second going through as it does not return back, due too the spring for some reason have being weakened?

All the best ... Jack

[joshh1512]

Re: vsr double firing

I did literally just get the new hop unit a week ago, the upgraded tm one, i will try it with the part from my old one...

[jackwarz]

Re: vsr double firing

Good idea, and if it is that part thats the problem just send it back and i'm sure it will get replaced?

Jack