Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

L96 PDI Hop Bucking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • L96 PDI Hop Bucking

    Ok so I got a PDI Hop Chamber for L96 off here and a Firefly Hop Bucking Hard from the same guy at the same time. Iv now got the bucking and seen it says VSR on packet (my fault for not asking).*
    Now I'm pretty sure this won't fit in my new chamber but I would someone to tell me if Firefly Bucking for Marui AEG and Firefly for AEG is different. Don't want to go wrong again. Pics of the bucking here:
    One Iv got:
    http://shop.ehobbyasia.com/firefly-h...1911-mk23.html

    Marui:
    http://shop.ehobbyasia.com/firefly-h...marui-aeg.html

    AEG:
    http://www.************.co.uk/produc...r-all-aeg-soft

    Personally I think the last two are the same

    Warrior L96 and I would be using hard.

    Any help cheers
    Ric
    Stop Drop And Roll

  • #2
    Re: L96 PDI Hop Bucking

    You are not allowed to list competitors.

    The hop rubber you have is wrong you are in need of a AEG hop rubber.

    Preferably a Firefly one for the hop unit you now have, so the 2nd link is what your after if you want a marui hop rubber.

    Comment


    • #3
      Re: L96 PDI Hop Bucking

      With the pdi unit

      You need the silicone pdi nub that came with the NEW unit

      Otherwise you will have problems

      Comment


      • #4
        Re: L96 PDI Hop Bucking

        Cheers once again but what I meant was is the Marui aeg rubber same as the aeg rubber. I'm guessing yes
        Stop Drop And Roll

        Comment


        • #5
          Re: L96 PDI Hop Bucking

          Scrub this thread since Firefly are virtually impossible to find in UK im gonna go with the Prometheus Air Seal Chamber Hard Red. Hopefully will be just as good.
          Stop Drop And Roll

          Comment

          About the Author

          Collapse

          The Dr Find out more about The Dr
          Working...
          X